High Power 1450nm IR LED 1400nm 5050 Package

High Power Far Red IR LED with 5050 SMD LED;

3W is a high power output in Light Emitting Diode, we have to use bigger SMD LED frane for package. This 5050 LED frame have a bigger heat sink on the bottom, because that will make sure LED have a good heat dissipation performance. As we know, that will highly related the lifespan of LED. We got small power 1400nm LED with 2835 SMD LED case. If you were looking for High Power IR LED for your project with 1400nm wavelength. Just check in this 5054FIRC145L42I1A. There just one single chip inside which will make sure it emits the radiation from the middle of LED. Contact us for more detail if you interested in this high power IR LED in your project~

High Power Far Red IR LED Product Size: 

*This LED frame size are also available in UV LED , Yellow LED , Green Smd LED, Blue SMD LED and Red Smd Led ect*

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

    4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

    4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

    4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances. 

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.