SMD 2727 RGB Display LED with Domed Lens

2727 RGB SMD LED 60 Degree Domed Lens

There have some many RGB LED that widely used in LED display. Such as 5050 RGB LED, 2727 RGB LED, 3528 RGB LED ect. But most of the are just flat top. In this case, we offer a domed lens type: 2727RGB-60A, this is LED SMD 2727 size with a 60 degree domed lens on the top. Which can make the brightness higher than flat top. It's 6 pins RGB LED that have black surface body and white led frame, which can make sure this LED got a higer brightness during the working. 

Features: 

Chips: Red chip + blue chip + green chip;

60 degree domed lens;

High reliability and high raditaion intensity;

RoHs standard;

Electrical Parameters:

*Soldering condition: Soldering condition must be completed with 3 seconds at 260℃

Main Application:

LED Backlight, Indicator light, LED toy, LED flexibel strip;

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

    4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

    4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

    4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances. 

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.