830nm Light Emitting Diode 2835 SMD LED 90-Degree

2835 SMD LED 90 degree with 830nm wavelength; 

830nm near infrared light has a wavelength of 830 nanometers (nm) and falls just beyond the visible spectrum. Near infrared light is not visible to the human eye but can be detected by certain devices and cameras. 830nm LED is often used in various fields including photography , remote sensing, optical communications, and medical imaging. But when we package it with 830nm Light Emitting Diode such as 2835 SMD LED type, 5050 SMD LED type or LED Lamps type , because of the explosion of LED we will still can see there have a dim red light in the middle of Dome lens SMD LED. 

Electrical Optical Characteristics:

*Luminous Intensity is measured byZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of device

830nm LED size in 2835 SMD LED with 90 degree:

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.