Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Packaging: Carton box
Productivity: 1000000000 pcs/week
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 7000000000 pcs/week
Certificate: GB/T19001-2008/ISO9001:2008
HS Code: 8541401000
Port: SHENZHEN
Payment Type: T/T,Paypal,Western Union
Incoterm: FOB,EXW,FCA
Model No.: 304RD
Brand: Best LED
Color: Red
LED Type: Red Through-Hole Led
Lens Type Of 3mm LED: Red Diffused Lens
Shape Of 3mm Red LED: 3mm Round Top
Brightness Level Of 3mm LED: Common Bright
Inner Packing: 1000pcs/Bag
Pins Length: 29mm & 27mm
Brightness Of Red LED: 100-200mcd
Inside Connection Wire: Gold Wire
Wavelength: 620-630nm
Selling Units: | Piece/Pieces |
---|---|
Package Type: | Carton box |
Red 3mm standard LEDs with through-hole red diffused lens
Red Through-Hole LED can be different size, 3mm diameter LED, 5mm diameter LED ect. This 304RD is a 3mm Red Through-Hole LED that have a round top cylinder and red diffused lens. We produce this red LED Lamps with 625nm LED chip inside for emitting color. When we light this little LED up, the red diffused lens will make the light more soft and diffused. Which make this LED perfect for LED Indicator. We will use this LED to produce the cuitcir board indictor. Best LED factroy provide the highest quality, best service and the most competitive price. If you need some of this red LED for your project. Just feel free to contact us~
Size of 3mm through-hole LED:
Through-hole LED Features:
* Dimension of Lens: 3mm;
* Wavelength 620-630nm;
* Lens type: Red diffused;
* High reliability and high radiation intersity;
Electrical Parameters:
Parameter | Symbol | Rating | Unit |
Power Dissipation | Pd | 60 | mW |
Pulse Forward Current | IFP | 100 | mA |
Forward Voltage | IF | 25 | mA |
Reverse Voltage | VR | 5 | V |
Junction Temperature | Ti | 100 | ℃ |
Operating Temperature | Topr | -40 ~ +80 | ℃ |
Storage Temperature Range | Tstg | -40 ~ +80 | ℃ |
Soldering Temperature | Tsol | 260 | ℃ |
Electro-Static-Discharge(HBM) | ESD | 1000 | V |
Service life under normal conditions | Time | 50000 | H |
Warranty | Time | 2 | Years |
Antistatic bag | Piece | 1000 | Bag |
* Pulse forward current condition: Duty 1% and pulse width=10us.
* Soldering condition: Soldering condition must be completed with 3 secongds at 260℃
Electrucal Optical Characteristics(Tc=25℃)
Parameter | Sysmblo | Min | Typ | max | Unit | Test Conditin |
Forward Voltage | VF | 1.8 | 2.0 | 2.4 | V | IF=20mA |
Luminous Intensity | IV | 100 | | 200 | mcd | IF=20mA |
Peak Wavelength | λP | | 633 | | nm | IF=20mA |
Dominant Wavelength | λD | 620 | 625 | 630 | nm | IF=20mA |
Half Width | △λ | | 18 | | nm | IF=20mA |
Viewing Half Angle | 2θ1/2 | | 40 | | deg | IF=20mA |
Reverse Current | IR | | | 5 | uA | VR=5V |
*θ1/2 is off-sxis angle at which the luminous intenity is half the axia luminous intensity;
Main application:
* Ideal for backlight;
* Indicator light;
* LED decorative lamp;
Product Details:
99.99% purity gold wire;
Silver plated LED frame;
Famous branded chips;
High quality epoxy;
Manufacturing progress of through-hole LED:
Compare with SMD LED, through-hole LED production will be more complicated. Which means it will take more production progress and production time:
First of all, we need to prepare the LED chip(this will be same as SMD LED production); Secondly, we will need to put the LED chip into the LED frame, and then we will need the pure gold wire to connect the cathode and anode of LED frame. There comes different, For SMD LED production, we need to put the epoxy to LED frame and wait until it dry by oven. However, for LED Lamps, we need to inject epoxy into the mold of lens and put all the things to oven for at least 8 hours until they dry. After that, we need to tae them from the oven and get the LED out of mold. And then we need to cut the pins of LED so that they can be easy to test.
Finally, we got the LED. In order to make sure the quality and the uniform as good as required. We also need to put all the LED to the separation machine and them we will got the LED with same bins.
Storage Conditions:
1. avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature;
2. LEDs should be stored with temperature ≤30℃ and relative humidity<60%℃;
3. Product in the original sealed package is recommended to be assembled within 72 hours of opening;
4. Product in opened package for more than a week should be baked for 6-8 hours at 85-10℃;
LED MOUNTING METHOD
1, The lead pitch of the LED must match the pitch of the mounting holes on the PCB during component placement;
Lead-forming may be required to insure the lead pitch matches the hole pitch;
Refer to the figure below for proper lead forming procedures;
Do not route PCB trace in the contact area between the leadframe and the PCB to prevent short-circuits;
Noted:
○ Correct mounting method;
× Incorrect mounting method;
2. When soldering wires to the LED, each wire joint should be separately insulated with heat-shrink tube to prevent short-circuit contact.
Do not bundle both wires in one heat shrink tube to avoid pinching the LED leads;
Pinching stress on the led leads may damage the internal structures and cause failure;
Noted:
○ Correct mounting method;
× Incorrect mounting method;
3. Use stand-offs(Fig 3)or spacers(Fig 4)to securely position the LED above the PCB;
4. Maintain a minimum of 3mm clearance between the base of the LED lens and the first lead bend (Fig. 5. Fig. 6)
5. During lead forming, use tools or jigs to hold the leads securely so that the bending force will not be transmitted to the LED lens and its internal structures;
Do not perform lead forming once the component has been mounted onto the PCB;
Lead Forming Procedures
1. Lead Forming Procedures;
2. Do not bend the leads more than twice (Fig. 7);
3. During soldering, component covers and holders should leave clearance to avoid placing damaging stress on the LED during soldering(Fig 8);
4. The tip of the soldering iron should never touch the lens epoxy;
5. Through-hole LEDs are incompatible with reflow soldering;
6. If the LED will undergo multiple soldering passes or face other processes where the part may be subjected to intense heat please check with Best LED for compatibility;
Tel: 86-0755-89752405
Whatsapp: +8615815584344
Email: amywu@byt-light.comAddress: No.3, Lida alley, Qiuwu community, Longgang District, Shenzhen, Guangdong, China. 518116, Shenzhen, Guangdong China
Website: https://www.bestsmd.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.