- Leseli la 940nm -

5054FIRC-94L42I1A-ES

SMD LED le eona e ka ba le lehlakore la ho shebella joalo ka ts'ebeliso ea hau. Ka kopo sheba sets'oants'o ka tsela e latelang: Re kentse 940nm LED bare die ka 5054 SMD LED e matla e phahameng ea linyeoe tsa SMD. Bakeng sa ho fokotsa sekhahla sa ho shebella matla ana a phahameng a IR LED, re kentse lense ea bokaholimo ka holim'a 940nm LED SMD LED. Ka lense ena, LED ena ea IR e khona ho ntša sebaka se selelele sa radiation. Na o ntse o ts'oenyehile ka hore ka lesoba la LED ha le khone ho fihlela moralo oa hau? Haeba o hloka mofuta o mong oa LED ea SMD e nang le sephetho sa mabone se ts'oanang le lesoba la LED. Ebe lense ea dome e hlakileng e ka ba khetho bakeng sa ts'ebeliso ea hau! Joalokaha setšoantšo se latelang, re kentse LED ena ka matla a phahameng a 5050 SMD LED, ka mor'a moo, re kentse lense e hlakileng ea dome ka holim'a SMD LED e le hore SMD ena ea LED le eona e be le pono ea likhato tse 30 tse lekanang le 30 LED ea degree-hole e ka etsang hore matla ana a phahameng a IR LED 940nm LED a fumane sephetho sa mabone se shebaneng haholoanyane. Na o hloka matla a mang a phahameng a 940nm IR LED bakeng sa ts'ebeliso ea hau ea moralo? Iteanye le rona bakeng sa tlhaiso-leseling e batsi ka eona ~

- Boholo ba LED ea Matla a Phahameng -

. Litekanyo tsohle li limilimithara; 2. Mamello ke ± 0.10 mm ntle le ha ho boletsoe ka hosele.

- Nyeoe ena e fumaneha hape bakeng sa 940nm LED, 850nm LED ect e phahameng ea matla IR LED -

- Lisebelisoa tsa Motlakase -

Feletseng Boholo Ratings Ha Ta = 25 ℃

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5		2.0	V	IF=350mA
			2.5	3.2	V	IF=1000mA
Luminous Flux	Φ	230		280	mw/sr	IF=350mA
			420		mw/sr	IF=1000mA
Peak Wavelength	λP		940		nm	IF=20mA
Half Width	Dl		40		nm	IF=20mA
Viewing Half Angle	2q1/2		±45		deg	IF=20mA
Reverse Current	IR			10	uA	VR=5V
Rise Time	Tr		15		ns	IF=20mA
Fall Time	Tf		13		ns	IF=20mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, fektheri ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Paka ea LED ea IR -

* Re ka thoto LED ena le palo efe kapa efe ea liphutheloana ebe o tlanya kapa koba lithakhisa tsa LED joalo ka tlhoko ea hau.

- Ts'ebeliso -

- E amanang le SMD IR LED -

- Tsamaiso ea Tlhahiso -

- LED ea SMD IR -

- Litifikeiti -

GB / T19001-2008 / ISO9001: 2008, RoHS, CE, SVHC (Finyella), EN62471