3mm 495nm 500nm Turquoise LED Long Leg

Cyan LED 3mm LED Long Leg with Clear Lens;

3mm through-hole LED can be package with different lens such as color diffused lens, clear transparent lens, white diffused lens ect. But not just the lens, we can also adjust the leg length for you. Our common 3mm LED have 29mm(the longer pin), If that leg length are too short to your application, we can make it with 81mm(the longer pin) for you in this ultra long leg type of 3mm LED. In order to produce a beautiful color in this Through-hole LED, we produce it with the turquoise LED chip inside(some people also name it with cyan LED). Contact us if you need more detail for this LED Lamps. 

Electrical Parameters:

*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃

3mm LED Long Leg Size :  

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.