- Taa za LED za infrared -

503IRBT-94L / 16I120-45A

LED hizi za infrared 5mm zilifungwa na lensi za hudhurungi. Hii ni Emitter ya infrared LED, watu wengine wanaweza kudhani hatuwezi kuona nuru yoyote ya rangi wakati taa hii ya infrared inafanya kazi. Lakini kwa kweli, tunaweza kuona doa nyekundu / hafifu nyekundu wakati taa za taa za infrared za 940nm zinafanya kazi. Mradi mwingine unaweza usikubali taa hii nyekundu, kisha tunapakia hii na lensi za hudhurungi kufunika taa hii ya ziada. Je! Unahitaji 940nm LED na pato la 0.4W kwa mradi wako? Wasiliana nasi kwa mkia zaidi juu yake. Pia kuna aina ya pembe ya kutazama kwa chaguo lako.

- Ukubwa wa 5mm IR kupitia shimo la LED -

* Ukubwa huu pia unapatikana kwa LED zingine, kama vile UV LED, IR IR (810nm LED, 850nm LED ...), Amber LED, Yellow LED, RGB LED, Blinking LED Lamps *

- Kufanya kazi kupitia shimo la IR LED -

* Rangi kwenye picha ilichukuliwa na kamera, tafadhali chukua rangi halisi inayotoa kama kawaida.

- Kupitia-shimo IR Kigezo cha LED -

Viwango vya juu kabisa kwa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Tabia za macho na umeme ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uunganisho wa waya wa dhahabu -

* Ili kuweka kila urefu wa maisha ya LED, kiwanda cha BestLED hutumia waya safi wa dhahabu safi kwa unganisho la mzunguko wa ndani

- Ufungashaji wa IR ya IR -

* Tunaweza kupakia LED hii na idadi yoyote ya vifurushi na kunasa au kunama pini za LED kama mahitaji yako.

- LED inayohusiana ya IR -

- Mchakato wa Uzalishaji -

- T -shimo la mwangaza IR -