- Mabone a LED a Infrared -

EA-503-FIRC-74L / 14I100-45A

Hase feela 730nm infrared LED e ka sebelisoang kalafo ea infrared LED , empa hape le 730nm LED, 740nm LED, 760nm LED e ka sebelisoang haholo mefuteng ea mochini oa kalafo oa IR LED. Ho boetse ho na le mefuta ea ho shebella angle ho LED ena ea lesoba bakeng sa khetho ea hau. Likarolo tse fapaneng tsa ho shebella li tla etsa sephetho se fapaneng sa mabone, o ka khetha e 'ngoe ea tsona bakeng sa projeke ea hau. Na o hloka emitter ea 740nm ea LED bakeng sa projeke ea hau? Ikopanye le rona rea ​​tseba, sehlahisoa sena se nang le ts'epo e matla ea bophelo bo bolelele le ts'ebeliso e tlase ea matla se ke ke sa u lumella hore u soetsehe. Joalokaha re tseba, infrared LED e ntša khanya e khubelu ha e sebetsa. Na u nahana hore mahlaseli 'ohle a infrared ha a bone ka mahlo a hlobotse? Joale o kanna oa fosahala ntlheng ena ~ Empa ha o ntse o le teng nako e telele ho feta, khanya e khubelu e tlase eo o tla e fumana. Joalokaha re tseba, ho na le matla a matla ha o ne o sebelisa diode ea laser ea 740nm, o tlameha ho e sebelisa ka hloko ho seng joalo o tla ichesa. Empa bakeng sa sena, re kentse sena ka 740nm LED chip le lense e hlakileng. Eo e leng feela diode e khanyang.

- Boholo ba 5mm LED ea lesoba -

- Ka har'a lesoba LED e khanyang -

* Mebala e setšoantšong e nkuoe ka kh'amera, ka kopo nka 'mala o hlasimollang o tloaelehileng.

- Phaliso ea LED ea lesoba -

Lintlha tse felletseng tsa boholo bo felletseng ho Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, fektheri ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Ho paka ka LED -

* Re ka thoto LED ena le palo efe kapa efe ea liphutheloana ebe o tlanya kapa koba lithakhisa tsa LED joalo ka tlhoko ea hau.

- LED e amanang ea IR -

- Tsamaiso ea Tlhahiso -

- T ea sekoti sa IR LED -