- Nalalka Laydhka infrared -

503IRBT-94L / 16I120-45A

Kuleylkan '5mm infrared LED' waxaa lagu soo xiray muraayad buluug ah. Kani waa Emitter LED infrared, dadka qaarkiis waxay u maleyn karaan inaan arki doonin iftiin midab leh markii uu shaqeynayo LED-kan infrared-ka ah. Laakiin dhab ahaantii, waxaan arki karnaa xoogaa yar / mugdi casaan ah marka xoogaa xoog ah 940nm laydhadh infrared LED ah ay shaqeynayaan. Mashruuca qaar ayaa laga yaabaa inuusan aqbalin iftiinkan casaanka ah, ka dibna waxaan ku xirxireynaa muraayad buluug ah si aan ugu daboolno nalkan dheeriga ah. Ma u baahan tahay xoogaa 940nm LED ah oo leh soosaarka 0.4W ee mashruucaaga? Nala soo xiriir wixii dabada ah ee ku saabsan. Waxa kale oo jira nooc xagasha daawashada ah oo aad dooratid.

- Cabbirka 5 mm IR Dhex-dhexaad ah -

* Cabbirkani wuxuu sidoo kale diyaar u yahay LED-ka kale, sida UV LED, IR LED (810nm LED, 850nm LED ...), Amber LED, Yellow LED, RGB LED, Llinking LED Lamps *

- Ka shaqeynta dalool IR LED -

* Midabada sawirka waxaa qaaday kamarad, fadlan u qaado midabka sii daaya dhabta ah sida caadiga ah.

- Hal-beegga IR LED-ka -

Absolute ugu Qiimeynta Ugu Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Astaamaha Muuqaalka iyo Korantada ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Xiriirinta silig dahab ah -

* Si loo ilaaliyo mid kasta oo ka mid ah cimriga dheer ee LED, warshadda BestLED waxay u isticmaashaa silig dahab saafi ah oo saafi ah gudaha isku xirka wareegga

- Xirmooyinka IR LED -

* Waxaan ku xirxiran karnaa nalkan lambar kasta oo baakado ah oo waan duubnaa ama leexin karnaa biinanka LED-ka sida shuruuddaada ah.

- Laydhka la xidhiidha IR -

- Habka wax soo saarka -

- T hrough-hole IR LED -