- infrared mwenje mwenje -

503IRBT-94L / 16I120-45A

Aya ma5mm infrared LED akaiswa mukati nebhuruu lens. Iyi infrared LED Emitter, vamwe vanhu vanogona kufunga kuti hatizoone chero mwenje wevara kana iyi infrared LED iri kushanda. Asi chaizvo, isu tinogona kuona imwe diki / kudzima tsvuku nzvimbo kana imwe yakakwira simba 940nm infrared mwenje mwenje iri kushanda. Imwe purojekiti inogona kusatambira mwenje mutsvuku, tobva tazviputira ne lens yeblue kuti tivhare iyi imwe mwenje. Iwe unoda here 940nm LED ine 0.4W kuburitsa kweprojekiti yako? Taura nesu kuti uwane mamwe muswe nezvazvo. Iko zvakare kune mhando yekutarisa kona yesarudzo yako.

- Saizi ye5 mm IR Kupfuura-gomba LED -

* Saizi iyi inowanikwawo kune mamwe ma LED, akadai seUV LED, IR LED (810nm LED, 850nm LED ...), Amber LED, Yera LED, RGB LED, Blinking LED Lamp. *

- Kushanda Kupfuura-gomba IR LED -

* Mavara ari pamufananidzo akatorwa nekamera, ndapota tora chairo kuburitsa ruvara seyakajairwa.

- Kuburikidza-gomba IR IR Parameter -

Mhedziso Maximum Ratings At Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optical uye Magetsi Hunhu ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Goridhe waya yekubatanidza -

* Kuti uchengetedze yega yega yehurefu hwakareba hwe LED, fekitori yeWestLED inoshandisa waya yakachena yegoridhe yemukati yekubatana kwedunhu

- IR akatungamira kurongedza -

* Tinogona kurongedza iyi LED nechero nhamba yemapakeji uye taped kana kukomberedza iwo mapini e LED sekudikanwa kwako.

- Yakabatana IR LED -

- Kugadzira Maitiro -

- T kubvongodza-gomba IR LED -