5050 RGBW LED RGB+natural White 4 in 1

8 Pins 5050 SMD LED RGB + Natural White RGBW LED

Same as white SMD LED, we can also produce the little white led on the RGBW LED as we need. Like warm white LED, cool white LED or natural white LED ect. If you need some white LED with the color temperature meet your required like 3000-4000K, 5000-6000K, 10000-20000K ect. Just feel free to let us know then we can produce it as your required. For this RGBW LED, there have 8 pins on the bottom of SMD LED to connect the circuit. Both of pin are charge for each color. There have 4 kinds of color in all, as we know, the more current, the more brightness. In this case, we can control the mixed color by current. 

Feel free to contact us if you need more information about that~

Dimension Parameters of 5050 SMD LED; 

*These SMD LED case are also available for  IR LED , UV LED , Blue SMD LED, Red Smd Led, Amber LED ect.*

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.