- infuraredi anatsogolera Nyali -

Gawo #: 503IRBT-94L / 16I120-45A

Ma infrared LED awa anali mmatumba a mandala abuluu. Awa ndi ma emitter a infrared LED, anthu ena angaganize kuti sitiwona kuwala kwa mtundu uwu pamene ma infrared awa akugwira ntchito. Koma kwenikweni, titha kuwona malo ofiira pang'ono / ofiira pomwe nyali zina zamphamvu za 940nm infrared LED zikugwira ntchito. Pulojekiti ina singalandire kuwala kofiira kumeneku, kenako timayika ndi mandala abuluu kuti tiphimbe kuwala kwina. Mukufuna 940nm LED yokhala ndi 0.4W yotulutsa pulojekiti yanu? Lumikizanani nafe kuti mumve zambiri za izo. Palinso mtundu wa mawonekedwe owonera omwe mungasankhe.

- Kukula kwa 5 mm IR Kupyola-una LED -

* Kukula uku kumapezekanso ndi ma LED ena, monga UV LED, IR LED (810nm LED, 850nm LED ...), Amber LED, Yellow LED, RGB LED, Kuwala kwa Mabala a LED *

- Kugwira Ntchito Pabowo IR IR -

* Mitundu pachithunzicho idatengedwa ndi kamera, chonde tengani utoto weniweni monga muyezo.

- Kupyola-pozungulira IR LED Parameter -

Mtheradi Zolemba Mavoti Pa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Makhalidwe Abwino ndi Magetsi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Kulumikizana kwa waya wagolide -

* Pofuna kusunga nthawi yayitali ya LED, fakitale ya BestLED imagwiritsa ntchito waya wagolide wangwiro wolumikizira mkati

- Kuyika kwa IR IR -

* Tikhoza kumunyamula anatsogolera izi ndi chiwerengero cha phukusi ndi zikujambulidwa kapena unakhota zikhomo LED monga lamulo lanu.

- IR Yogwirizana -

- Njira Yopangira -

- Dzenje lakuyatsa la IR -