Sicht Dir no e puer Tri-colou r SMD LED fir Äre Projet? 3528RYG-10 gouf vu rout, giel a gréng LED blo Stierf verpackt, wat rout LED Faarf, giel LED Faarf a gréng LED Faarf ausstelle kann, wann Dir just d'c urrent mat engem eenzegen Chip verbënnt. Selwecht wéi RGB LED SMD, kann dës RGY LED SMD och wäit an LED Display ect Uwendung benotzt ginn. RGB a RGY dräi Faarf LED Serie ass entwéckelt fir endlos lieweg Faarfkombinatioun ze bidden, mat Faarfmëschungsfäegkeet fir Leeschtungskonsistenz z'erreechen. Dës dräifaarweg LED verfügbar an Top Emitting a richtege Wénkel SMD an Duerch-Loch LEDen (5mm Duerch-Loch LED, 8mm Duerch-Loch LED, 10mm Duerch-Loch LED ECT ). Fir all déi dräi Faarf LED, Bescht LED Fabrik kann et mat 6 Pins paken an all Faarf kann onofhängeg gefuer ginn. Braucht Dir e puer RGY SMD LED fir Äre Projet? Kontaktéiert eis elo ~

- Dimensiounsparameteren -

Dës SMD LED Fall sinn och verfügbar fir IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ausstrahlend Faarf -

- Elektresch Parameteren -

Parameter	Symbol	Rating			Unit
		Red	Green	Blue
Power Dissipation	Pd	75	105	105	mw
Pulse Forward Current	IFP	200	200	200	mA
Forward Current	IF	30	30	30	mA
Reverse Voltage	VR	5	5	5	V
Junction Temperature	Tj	110			°C
Operating Temperature	Topr	-40 ~ +80			°C
Storage Temperature Range	Tstg	-40 ~ +100			°C
Soldering Temperature	Tsol	260			°C
Electro-Static-Discharge(HBM)	ESD	2000	2000	2000	V
Service life under normal conditions	Time	80000			H
Warranty	Time	5			Years
Antistatic	Piece	2000			Back

Optesch an Elektro Charakteristiken ( T c = 25 ℃ )

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	Red	VF	1.8	2.0	2.4	V	IF=20mA
	Green			3.0	3.4
	Blue			3.0	3.4
Luminous Intensity	Red	IV	500		800	mcd	IF=20mA
	Green				1800		IF=20mA
	Blue				700		IF=20mA
Peak Wavelength	Red	λP		633		nm	IF=20mA
	Green			527
	Blue			590
Dominant Wavelength	Red	λD	618	620	626	nm	IF=20mA
	Green			520	525
	Blue			589	594
Half Width		Dl		18		nm	IF=20mA
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current		IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Méi 3528 RYG LED -

- Golden Wire Connection -

* Fir all d'LED Liewensdauer ze halen, benotzt d'BestLED Fabréck héich reng Golddrot fir bannenzeg Circuitverbindung

- Verpakung -

* Mir verpacken et mat Vakuumverpackung nom Band et als Spull

-Applikatioun-

- Produktioun -

- Benotzt -