Na-achọ ụfọdụ tri-colou r SMD ikanam maka oru ngo gị? 3528RYG-10 ejiri acha ọbara ọbara, odo na akwụkwọ ndụ akwụkwọ ndụ na-acha ọbara ọbara, nke nwere ike ịmịcha agba agba agba, agba odo na agba aja aja mgbe ị jikọtara c na otu mgbawa. Otu dị ka RGB LED SMD, RGY LED SMD nwekwara ike jikwa ya mee ihe na ikanam ngosi ect ngwa. Ezubere usoro RGB na RGY agba agba agba atọ iji nye ụcha agba agba na-enweghị njedebe, na-eji ike agwakọta agba iji nweta arụmọrụ arụmọrụ. Ikanam ndị nwere agba agba atọ dị n'elu emitting na akụkụ aka nri SMD na oghere ndị gbara agba (5mm through-hole LED, 8mm through-hole LED, 10mm through-hole LED ect ). N'ihi na ihe atọ niile na ikanam, Best ikanam factory nwere ike ngwugwu ya 6 atụdo na onye ọ bụla na agba nwere ike chụpụrụ onwe ha. Need chọrọ ụfọdụ RGY SMD Ikanam maka ọrụ gị? Kpọtụrụ anyị ugbu a ~

- Akụkụ Dimension -

Ihe ndị a SMD LED ahụ dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

- Ntọala eletriki -

Parameter	Symbol	Rating			Unit
		Red	Green	Blue
Power Dissipation	Pd	75	105	105	mw
Pulse Forward Current	IFP	200	200	200	mA
Forward Current	IF	30	30	30	mA
Reverse Voltage	VR	5	5	5	V
Junction Temperature	Tj	110			°C
Operating Temperature	Topr	-40 ~ +80			°C
Storage Temperature Range	Tstg	-40 ~ +100			°C
Soldering Temperature	Tsol	260			°C
Electro-Static-Discharge(HBM)	ESD	2000	2000	2000	V
Service life under normal conditions	Time	80000			H
Warranty	Time	5			Years
Antistatic	Piece	2000			Back

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	Red	VF	1.8	2.0	2.4	V	IF=20mA
	Green			3.0	3.4
	Blue			3.0	3.4
Luminous Intensity	Red	IV	500		800	mcd	IF=20mA
	Green				1800		IF=20mA
	Blue				700		IF=20mA
Peak Wavelength	Red	λP		633		nm	IF=20mA
	Green			527
	Blue			590
Dominant Wavelength	Red	λD	618	620	626	nm	IF=20mA
	Green			520	525
	Blue			589	594
Half Width		Dl		18		nm	IF=20mA
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current		IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- More 3528 RYG ikanam -

- Njikọ ọla edo ọla edo -

* Iji mee ka onye ọ bụla n'ime ogologo ndụ ọkụ, ụlọ ọrụ BestLED jiri waya ọla edo dị elu maka njikọ njikọ

- Mbukota -

* Anyị na-agbakọ ya na ngwongwo agụụ mgbe teepu ya dị ka eriri

- Ngwa-

- Mmepụta -

- Jiri -