- 660nm ikanam -

5050FRC-66L / 14

0.2W SMD LED 5050 3-chips 660nm LED bụ ọkụ ọkụ na-acha uhie uhie, nke a na-ejikarị ya na ụlọ ọrụ mara mma, uto ihe ọkụkụ, mgbakwunye ọkụ, ma ọ bụ ụfọdụ ngwa ndị ọzọ pụrụ iche. N'ihi ụgwọ nke 660nm LED, LED ndị a na-acha uhie uhie anaghị ewu ewu na ọkụ ọkụ ọkụ ma ọ bụ oriọna LED. Agbanyeghị, 660nm LED ka na-ewu ewu n'ihi na ọ bụ mmetụta. Tụlee ya site-oghere ikanam na 660nm, 660nm SMD ikanam ga-a mma arụmọrụ na okpomọkụ dissipation. N'aka nke ọzọ, SMD LED nwekwara obere pere mpe karịa oghere ọkụ, nke dị mfe dabara na bọọdụ PCB na igwe ịgbado ọkụ na-akpaghị aka. Dị ka anyị si mara, enwere ọnọdụ atọ na 5050 SMD LED. Ka ọ were 5050 SMD Ikanam ikpe nwere ike packaged na 3 ibe n'ime. Maka ụfọdụ oru ngo, naanị otu mgbawa nwere ike ghara iru ihe a chọrọ. Iji nwekwuo mmepụta na radieshon na otu ikanam, anyị ga-agbakọta nke a na 3 otu ikanam ikanam n'ime 5050 SMD LED iji ruo radieshon siri ike ma ọ bụ nchapụta. Enwere ụdị ọkụkụ ọkụ dị n'otu 5050 SMD LED, nke nwere ike ịbụ mgbawa dị iche iche 3 ma ọ bụ 3 otu mgbawa ahụ. Ọ bụ kpam kpam ka gị chọrọ. Ọ bụrụ na otu mgbawa ọkụ 660nm LED enweghị ike iru ihe ị chọrọ, onye a agaghị ekwe ka ị mechu ihu. Mmepụta ọkụ edo edo, ogologo ndụ ogologo oge ntụkwasị obi na ike oriri dị ala bụ uru niile nke 3 chips 660nm SMD LED. Kpọtụrụ anyị maka nkọwa zuru ezu banyere ya ~

- Dimension Parameters-

Ihe ndị a SMD LED ahụ dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

- Ntọala eletriki -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	1.9	2.3	V	IF=60mA
		1.9	2.1	2.4	V	IF=180mA
		2.0	2.2	2.5	V	IF=300mA
Luminous Intensity	ΦVI	2.7		3.8	lm	IF=60mA
		9		13	lm	IF=180mA
		12		18	lm	IF=300mA
Lumiuous Power	PO	35		55	mw	IF=60mA
		120		180	mw	IF=180mA
		200		300	mw	IF=300mA
Peak Wavelength	λP	655	660	665	nm	IF=60mA
Dominant Wavelenth	λd	640	645		nm	IF=60mA
Half Width	Dl		17		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ ọla edo ọla edo -

- Mbukota -

* Anyị na-agbakọta ya na ngwugwu agụụ mgbe teepu ya dị ka eriri

- Ngwa -

- Red ikanam metụtara -

- Mmepụta -

- 660nm SMD Ikanam Jiri -