Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Packaging: Carton box
Productivity: 1000000000 pcs/week
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 7000000000 pcs/week
Certificate: GB/T19001-2008/ISO9001:2008
HS Code: 8541401000
Port: SHENZHEN
Payment Type: T/T,Paypal
Incoterm: FOB,EXW,FCA
Model No.: 2835FIRC85L42I1A
Brand: Best LED
Supply Type: Original Manufacturer
Reference Materials: Datasheet
Place Of Origin: China
Species: Led
Package Type: Surface Mount
Power-Maximum: 3w
Emitting Direction: Top view
Side View LED Beam Angle: 120°
Base Material: Copper
Inner Packing: Anti-static Bag
Certification: RoHs
Chip Material: AIGaInP
Current: 1000mA
Emitting Color: Deep Red (Dim)
Size Of SMD LED: 2.8x3.5mm
Wavelength: 850nm(±10nm)
Selling Units: | Piece/Pieces |
---|---|
Package Type: | Carton box |
What is the High Power LED?
2835FIRC85L42I1A is a High Power IR LED with 850nm wavelength. Then what's the high power LED? Normally we produce the SMD LED with power like 0.06W, 0.1WW, 0.2W or 0.5W. All these LED have a small output for just one single LED. Sometime the LED just cannot reach what we required in our project, such as the brightness, radiation, efficiency ect. To sum up, the high power LED are just about to get higher output in just one single SMD LED or through-hole LED. Comapre with those 850nm LED that just got 0.2W output. This 2835FIRC85L42I1A will have 3W high output when it's working on 1000mA.
850nm High power LED 2835 LED Size:
* High Power SMD LED are also available in 940nm LED, 850nm LED, 730nm LED and some Far red infrared LED *
Electrical Parameters:
Parameter | Symbol | Rating | Unit |
Reverse Voltage | VR | 5 | V |
Junction Temperature | Tj | 100 | ℃ |
Operating Temperature | Topr | -40 - +80 | ℃ |
Storage Temperature | Tstg | -40 - +100 | ℃ |
Soldering Temperature | Tsol | 245 | ℃ |
Electro-Stati-Discharge(HBM) | ESD | 1000 | V |
Service lige under normal conditions | Time | 60000 | H |
Warranty | Time | 2 | Years |
Antistatic bag | Piece | 4000 | Bag |
*Pulse forward current confition: Duty 1% and Pulse width=10us.
*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃
Parameter | Symbol | Rating | Unit |
Forward Current | IF | 1000 | mA |
Forward Voltage | V | 1.6-1.8V | V |
Luminous Intensity | IV | 1000-1200 | mw |
Wavelength | λP | 850nm | nm |
Packing | Piece | 4000 | reel |
Vewing angle | 2θ1/2 | 120 | Deg |
*Luminous intensity is measured by ZWL600.
*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Production of SMD LED 2835 LED:
HANDLING PRECAUTIONS:
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;
4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.
4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;
4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.
5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.
6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.
Tel: 86-0755-89752405
Whatsapp: +8615815584344
Email: amywu@byt-light.comAddress: No.3, Lida alley, Qiuwu community, Longgang District, Shenzhen, Guangdong, China. 518116, Shenzhen, Guangdong China
Website: https://www.bestsmd.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.