- памер 5 мм ІЧ -адтуліну - святлодыёд -

- праз адтуліну Ір святлодыёд прамяністае -

*Колеры на фотаздымку зроблены камерай, калі ласка, вазьміце рэальны колер, які ў якасці стандарту.

- Праз адтуліну ІЧ -святлодыёдны параметр -

Абсалютны максімальны рэйтынг пры ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Аптычныя і электрычныя характарыстыкі ( t c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		7	11	mw/sr	IF= 50mA
		12	15	22	mw/sr	IF=100mA
			150		mw/sr	IF=1000mA
Luminous Power	PO		17		mw	IF=50mA
			28		mw	IF=100mA
			280		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.