Super Bright 850nm LED Individual LEDs 90 Degree

The 850nm LED chip in the 2835 SMD LED dome lens package. 

his is a individual LEDs Dome lens SMD LED with 850nm wavelength. The super bright type of this LED chip offers the highest level of brightness among the three types. It is designed to emit a significantly stronger and more intense light output compared to the common and high bright types. The super bright 850nm LED chip is ideal for applications that require a powerful and concentrated infrared light source. It is commonly used in various industries such as security systems, surveillance cameras, night vision devices, and optical communication equipment. The packaging of the 2835 SMD LED dome lens ensures efficient light distribution and enhances the overall performance of the super bright 850nm LED chip. The dome lens package helps to focus and direct the emitted light, resulting in a more focused and intense beam. With its superior brightness, the super bright type of 850nm LED chip in the 2835 SMD LED dome lens package provides excellent visibility and range for infrared applications. It offers a reliable and efficient solution for demanding lighting requirements in various industries.

Electrical Optical Characteristics:

*Luminous Intensity is measured byZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of device

Size of 850nm LED with 90 degree lens: 

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.