Wholesale IR 810nm LED Infrared 1206 3216 SMD

What wavelength is red light therapy? 

810nm wavelength is a red infrared wavelength and it's report that the high abosorption of melanin and hemoglobin makes this IR LED waveelngth have a good hemostatic effect. So that this 810nm LED IR LED are widely use in medical application. This 1206FIRC-81L14I100 were packaged by 1206 SMD LED case(3216 LED case). If this size still not small enough for you, package size like 0603 SMD LED (1608 SMD LED) or 0805 SMD LED (2012 SMD LED). Just feel free to contact us for more detail about that~

Size of 1206 SMD LED:

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

    4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

    4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

    4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances. 

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.