IR 760nm LED Diffused Lens 5050 SMD LED

As we know, there are kinds of IR LED in our factory such as, then how to power IR LED? Here are general steps to power an IR LED: First of all, determine the voltage and current requirements of the IR LED. This information can be found in the datasheet of the LED. And then we need to choose a power source that can provide the required voltage and current. This can be a battery or a power supply. After that we will connect the positive lead of the IR LED to the positive terminal of the power source and the negative lead to the negative terminal. During the test, if necessary, add a resistor in series with the LED to limit the current and prevent damage to the LED. Finally, test the LED to ensure it is functioning properly. For all IR LED, we can light it up with these steps no matter it's the 5050 SMD LED case or 2835 SMD LED case ect.  5050FIRWD76L14I100 are the IR LED that package with 5050 SMD LED so that here are 6 pads on the bottom of SMD LED. Three of them will be connected with anode and the other three pad will connect with cathode. 

Electrical Parameters:

*Luminous intensity is measured by ZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Size of 760nm IR LED 5050 SMD LED case: 

* This 5050 SMD LED are also available in Yellow LED, UV LED , Amber LED, Blue SMD LED, Green Smd LED ect.*

Product Details: 

99.99% purity gold wire;

Silver plated LED frame;

Famous branded chips;

High quality epoxy;