5050 SMD LED 660nm LED Deep Red SMT

5050 SMD LED With 660Nm LED 3 chips

This 5050FRC66P2L12 is a SMD LED that have three 660nm LED chip inside. There have three position inside of this 5050 SMD LED case so that we can put three chip inside for lighting. As your required, we can also produce this SMD LED with 3 different LED chip inside. Which can put red, green and blue color inside to produce a RGB LED . We can also put some wavelength that can be use in medical area, then it won't just a 5050 Red Smd Led. It will be medical SMD LED. 

Why LED become so popular in the market? 

1, Energy efficient. Energy saving are the most outstanding advantage of LED;

2, LED can work in high-speed switching state;

3, It's environmentally friendly. SMD LED or through-hole LED do not contain any mercury or other heavy metal pollution materials;

4, It's high-speed;

5, Cpmerare with other light surce. Light Emitting Diode got more clear light.

5050 SMD LED Size: 

*This size are also available in Multi-wavelength LED, such as RGB LED, Amber LED or some Custom LED ect*

Electrical Parameters:

*Pulse forward current confition: Duty 1% and Pulse width=10us.

*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃

*Luminous intensity is measured by ZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Main application of Deep red 660nm LED:

Manufacturing Process of SMD LED:

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

    4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

    4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

    4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances. 

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.