Are all 5050 LEDs the same? 

The answer is certainly no. SMD LED will named by the size, such as 2835 SMD LED, 2016 SMD LED ect. There are so many different 5050 SMD LED even their size is 5.0x5.0mm, such as hte thickness will be different, the chip position inside will be different or the heating performance will be different ect. In this 5050 LGC, we package it wtih the most common type of 5050 Green SMD LED. There are three chips inside of package and six pins on the bottom for electric connection. Gold wire and high grade epoxy production will make sure this Green Smd LED have a stable performance for your project!

5050 SMD LED Dimension Parameters

         These SMD LED case are also available for  IR LED , UV LED , Blue SMD LED, Red Smd Led, Amber LED ect.

Handling Precautions:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

    4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

    4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

    4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances. 

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.