High quality 2835 blue smd led 460nm

How to use the 2835 Blue SMD LED 460nm?

   1.First choose a power supply that can carry the voltage and current of the SMD LED.

   2.Connect the LED to the power supply.The positive terminal of the LED should be connected to the positive terminal of the power supply,and the negative terminal of the SMD LED should be connected to the negative of the power supply.

   3.Use a resistor to limit the current flowing through the 2835 SMD LED.The value of the resistor can be calculated using Ohm's law,which states that the resistance is equal to the voltage divided by the current.The value of the resistor should be such that the current flowing through the LED is within the maximum rating specified in the datasheet.

    4.Test this Dome lens SMD LED by applying power to it. If the LED dose not light up,check the connections and the polarity of the LED.

    5.Use the Domed LEDs in your project as desired,taking care to ensure that it is not subjected to excessive heat or current.

Electrical Optical Characteristics:

*Luminous Intensity is measured by ZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of device.

Notes:

1.All dimensions are in millimeters;

2.Tolerance is ±0.10nm unless otherwise noted.

3.The mark is Cathode.