5050 SMD LED 460nm emit blue light

  Now，more and more people to use the SMD LED.Because low energy saving high brightness,but also very convenient.The effect is also very wide,you can see a lot of colors everywhere you go.And than,the 5050 SMD LED can have different chips that it can emit different lights.How to use the 5050 SMD LED? You will need a power source,a controller,and a strip of 5050 smd blue led,than connect the power to the controller.Make sure that the voltage of the power source matches the voltage of the controller.Connect the SMD LED strip to the controller,make sure that the positive and negative wires are connected correctly.

      Than turn on the power source and test the SMD LED to make sure they are working properly.And install the SMD LED in the desired.You can use adhesive tape or mounting brackets to secure the 5050 SMD LED.And you can use the controller to adjust the brightness of the SMD LED according to your preference. 

Electrical Optical Characteristics:

*Luminous Intensity is measured by a ZWL600.

*q1/2  is the off=axis angle at which the luminous intensity half the axial luminous intensity.

Notes:

1.All dimensions are in millimeters;

2.Tolerance is ±0.10 mm unless otherwise noted.

3.The mark is Cathode.

5050 SMD LED effect drawing

Wavelength