Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Packaging: Carton box
Productivity: 1000000000 pcs/week
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 7000000000 pcs/week
Certificate: GB/T19001-2008/ISO9001:2008
HS Code: 8541401000
Port: SHENZHEN
Payment Type: T/T,Paypal
Incoterm: FOB,EXW,FCA
Model No.: 304IRC140L14I100A20
Brand: Best LED
Supply Type: Original Manufacturer
Reference Materials: Datasheet
Place Of Origin: China
Species: Led
Package Type: Surface Mount
Luminous Intensity: High Directivity
Formation: Gold Thread
Application: Electronic Products
Antistatic Bag: 1000PCS/Bag
Inner Packing: Anti-static Bag
Voltage: 0.8-1.2V
Color: Far Red Infrared LED
Wavelength: 1400nm(±100nm)
Chip's Quantity: 1 chips
Type Of Lens: 3mm 20 degree Clear Lens
Selling Units: | Piece/Pieces |
---|---|
Package Type: | Carton box |
Small LED Lamps Size of Far Red IR LED;
This 3mm IR LED have a lens size of 3x5.3mm. Compare with other 3mm size of through-hole LED Lamps, this one got the strongest radiation. During the production, the frist step is welding the chip on the cup of LED frame and putting the glue into the mould strip. After that, insert LED frame between glue molding. In this progress, we will be able to adjust the viewing angle, the more we close to the top, the wider viewing angle we will get. In the same package size, the more viewing angle we get, the bigger radiation area we will get and the radiation distance will lost at the same time. We can adjust this as your required.
3mm Through-hole LED Lamps Product Size:
*This LED frame size are also available in UV LED, Yellow LED, Green LED, Blue LED and Red LED ect*
Storage conditions
1. avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature;
2. LEDs should be stored with temperature ≤30℃ and relative humidity<60%℃;
3. Product in the original sealed package is recommended to be assembled within 72 hours of opening;
4. Product in opened package for more than a week should be baked for 6-8 hours at 85-10℃;
LED MOUNTING METHOD
1, The lead pitch of the LED must match the pitch of the mounting holes on the PCB during component placement;
Lead-forming may be required to insure the lead pitch matches the hole pitch;
Refer to the figure below for proper lead forming procedures;
Do not route PCB trace in the contact area between the lead frame and the PCB to prevent short-circuits;
2. When soldering wires to the LED, each wire joint should be separately insulated with heat-shrink tube to prevent short-circuit contact.
Do not bundle both wires in one heat shrink tube to avoid pinching the LED leads;
Pinching stress on the led leads may damage the internal structures and cause failure;
3. Use stand-offs(Fig 3)or spacers(Fig 4)to securely position the LED above the PCB;
4. Maintain a minimum of 3mm clearance between the base of the LED lens and the first lead bend (Fig. 5. Fig. 6)
5.During lead forming, use tools or jigs to hold the leads securely so that the bending force will not be transmitted to the LED lens and its internal structures;
Do not perform lead forming once the component has been mounted onto the PCB;
Lead Forming Procedures
1. Lead Forming Procedures;
2. Do not bend the leads more than twice (Fig. 7);
3. During soldering, component covers and holders should leave clearance to avoid placing damaging stress on the LED during soldering(Fig 8);
4. The tip of the soldering iron should never touch the lens epoxy;
5. Through-hole LEDs are incompatible with reflow soldering;
6. If the LED will undergo multiple soldering passes or face other processes where the part may be subjected to intense heat please check with Best LED for compatibility;
Tel: 86-0755-89752405
Whatsapp: +8615815584344
Email: amywu@byt-light.comAddress: No.3, Lida alley, Qiuwu community, Longgang District, Shenzhen, Guangdong, China. 518116, Shenzhen, Guangdong China
Website: https://www.bestsmd.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.