IR LED 1400nm Infrared LED Diode 0.2W 2835

1400nm LED Far red infrared LED;

IR LED wavelength can be from 680nm to 1550nm wavelength and each wavelength are available in high power type or small power type. In this case, we pacakge this 1400nm LED with 2835 SMD LED frame. Even there just one single chip inside, this SMD LED still can handle operation current like 100mA. Compare with 3528 SMD LED, this 2835 LED frame will got thinner size and better heat dissipation performance. That is a important thing becuase if the heat dissipation issue is not handled properly, the lifespan of LED will be reduced. 

2835 SMD LED Product Size: 

*This LED frame size are also available in UV LED , Yellow LED, Green Smd LED, Blue SMD LED and Red Smd Led ect*

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.