- 3528 RGB LED -

3528RGB-C

3528 RGB LED is kind of customized product that can packaged multi-color LED bare die with different color and brightness as your requirement. Normally, we produce this RGB LED and mark it as polarity anode in the unfilled corner. Which means in this LED, red green and blue three color will use the same anode polarity to connect with the current. In this case, we call this kind of LED as common anode. This RGB LED can have 0.2W high output for each single color. And have 0.6W high output when you light all three color at the same time. It will be a beautiful white color when you light all the color at the same time. On the other hand, if you need lower brightness on this RGB LED, you also can control this brightness by your current. The more current you offer, the more brightness you can get. 3528 RGB LED can be 6 pins and 4 pins and the polarity can be common anode or common cathode. if you have some requirement for the pins, just feel free to contact us and we will produce this LED as your requirement. 

               -Dimension Parameters -  

These SMD LED case are also available for  IR LED , UV LED, Blue SMD LED, Red Smd Led, Amber LED ect.

- Emitting Color -

- Electrical Parameters -

Parameter	Symbol	Rating			Unit
		Red	Green	Blue
Power Dissipation	Pd	75	105	105	mw
Pulse Forward Current	IFP	200	200	200	mA
Forward Current	IF	30	30	30	mA
Reverse Voltage	VR	5	5	5	V
Junction Temperature	Tj	110			°C
Operating Temperature	Topr	-40 ~ +80			°C
Storage Temperature Range	Tstg	-40 ~ +100			°C
Soldering Temperature	Tsol	260			°C
Electro-Static-Discharge(HBM)	ESD	2000	2000	2000	V
Service life under normal conditions	Time	80000			H
Warranty	Time	5			Years
Antistatic	Piece	2000			Back

 

Optical and Electrical Characteristics( Tc=25℃)

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	Red	VF	1.8	2.0	2.4	V	IF=20mA
	Green			3.0	3.4
	Blue			3.0	3.4
Luminous Intensity	Red	IV	500		800	mcd	IF=20mA
	Green				1800		IF=20mA
	Blue				700		IF=20mA
Peak Wavelength	Red	λP		633		nm	IF=20mA
	Green			527
	Blue			460
Dominant Wavelength	Red	λD	618	620	626	nm	IF=20mA
	Green			520	525
	Blue			466	470
Half Width		Dl		18		nm	IF=20mA
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current		IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- More 3528 RGB LED -

- Packing -

*We package it with vacuum packing after tape it as a reel

- Application - 

- Other Three color LED - 

- Production -

- Use -