Products
Home > Products > IR LED > 5050 SMD IR LED > 730nm IR LED - 5050 SMD LED 3-Chips
PRODUCT CATEGORIES
Payment Type: | T/T,Paypal |
---|---|
Incoterm: | FOB |
Min. Order: | 5000 Piece/Pieces |
Delivery Time: | 7 Days |
Basic Info
Model No.: 5050FIRC-73L14I240
LED Packaging Type: Chip
Chip Material: AlGaAs
Beam Angle: 120°
IP Rating: IP68
Base Material: Copper
LED Chips: Epistar
Power: 0.2W
Life: 80000h
Certification: FCC, RoHS, CE
Inner Packing: Anti-static Bag
Current: 20mA*3
Polarity: Polarity Mark Cathode
Size: 5.0*5.0*1.3mm
LED Power: 0.2w
Emitting Color: Deep Red
Voltage: 1.6-2.0V
Chip Size: 355*355um
Luminous Intensity: 50-70mcd
Dominant Wavelength: 730nm-740nm
Additional Info
Packaging: Carton box
Productivity: 1000000000 pcs/week
Brand: BestLED
Transportation: Ocean,Land,Air
Place of Origin: Shenzhen, China
Supply Ability: 7000000000 pcs/week
Certificate: GB/T19001-2008/ISO9001:2008
HS Code: 8541100000
Port: Shenzhen
Product Description
5050FIRC-73L14I240
The bare die in the middle of the SMD LED are the emitter area. When we just put one single chip inside, there will just have one chip emits the signal inside. When we put 3 chips inside as the picture down below, then there will have 3 chips for the emitting job, which will make the radiation more uniform and have a bigger radiation area. Do you need some 5050 three chips infrared LED for your application? For these three chips, we can also change and package it as your requirement. Different wavelength are available in this SMD LED case. Contact us for more detail about this now~
- Size: 5.0*5.0*1.3mm - Chip Number: 3 chips - Color:730nm IR LED - Type: Surface mount device - Chip brand: Epistar | - Polarity mark cathode - Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471 | - Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance |
-Dimension Parameters-
These SMD LED case are also available for IR LED , UV LED, Blue SMD LED, Red Smd Led, Amber LED ect.
- Emitting Color -
- Electrical Parameters -
Parameter Symbol Rating Power Dissipation Pd 200mw*3 Pulse Forward Current IFP 300mA*3 Forward Current IF 100mA*3 Reverse Voltage VR 5V Junction Temperature Tj 115°C Operating Tempertature Topr -40 - +80°C Storage Tempertature Tstg -40 - +100°C Soldering Temperature Tsol 260°C Electro-Static-Discharge(HBM) ESD 2000v Warranty Time 5Years Antistatic bag Piece 1000Bag *Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. *Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C
Parameter | Symbol | Min | Typ | Max | Unit | Test Condition | |
Forward Voltage | VF | 1.5 | 1.7 | 1.9 | V | IF=20mA*3 | |
1.6 | 1.8 | 2.0 | IF=50mA*3 | ||||
1.7 |
| 2.1 | IF=100mA*3 | ||||
Luminous Intensity | IV | 20 |
| 30 | mcd | IF=20mA*3 | |
50 |
| 70 | IF=50mA*3 | ||||
| 80 |
| IF=100mA*3 | ||||
Peak Wavelength | λP | 730 | 735 | 740 | nm | IF=20mA*3 | |
Half Width | Dl |
| 45 |
| nm | IF=20mA*3 | |
Viewing Half Angle | 2q1/2 |
| 120 |
| deg | IF=20mA*3 | |
Reverse Current | IR |
|
| 5 | uA | VR=5V | |
*Luminous Intensity is measured by ZWL600. | |||||||
*2q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. | |||||||
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. |
- Golden Wire Connection -
- Packing -
*We package it with vacuum packing after tape it as a reel
- Application -
- Related IR SMD LED -
- Production -
- SMD LED Use -
Product Categories : IR LED > 5050 SMD IR LED
Send Inquiry
Ms. ZhangFuqin
Tel:86-0755-89752405
Fax:86-0755-89752207
Mobile Phone:+8615815584344
Email:amywu@byt-light.com
Address: Building No. 1 Lane 1 Liuwu Nanlian The Fifth Industry Area , Longgang, Shenzhen, Guangdong
Related Products List
Mobile Site