- Izibani ze-infrared LED -

503FIRC-74L / 14I100-45A

Hhayi kuphela i-730nm infrared LED engasetshenziswa ekwelapheni kwe-infrared LED , kepha futhi ne- 730nm LED, i-740nm LED, i-760nm LED ingasetshenziswa kabanzi ezinhlotsheni zomshini wokwelapha we-IR LED. Kukhona nezinhlobo zokubuka i-engeli kule-hole-hole ye-LED oyikhethayo. Ama-engeli wokubuka ahlukile azokwenza imiphumela ehlukile yokukhanyisa, ungakhetha noma iyiphi yazo yephrojekthi yakho. Ngabe udinga i-740nm LED emitter yephrojekthi yakho? Xhumana nathi uyazi, lo mkhiqizo onokwethenjelwa kwempilo ende nokusebenzisa amandla okuphansi ngeke ukuvumele udumazeke. Njengoba sazi, i-infrared LED ikhipha ilambu elibomvu lapho isebenza. Ngabe ucabanga ukuthi wonke ama-infrared LED awakwazi ukubona ngamehlo ethu nqunu? Ngemuva kwalokho ungahle uyiphathe kabi kuleli cala ~ Kepha ubude besikhathi eside ngokwengeziwe, ukukhanya okuncane obomvu ozokuthola. Njengoba sazi, kunamandla amakhulu lapho usebenzisa i-diode ye-laser engu-740nm, kufanele uyisebenzise ngokucophelela ngaphandle kwalokho uzozishisa. Kepha ngalokhu, sikupake lokhu nge-740nm LED chip nelensi ecacile. Okuwukukhanya okukhipha ukukhanya kwediode.

- Usayizi we-5 mm nge-hole-LED -

- I-Through-hole LED Radiant -

* Imibala esithombeni yathathwa ngekhamera, sicela uthathe umbala ongokoqobo njengokujwayelekile.

- Ipharamitha ye-LED edlula yonke -

Izilinganiso Eziphelele Zika-Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Izici Zokubukeka Nezikagesi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uxhumano lwentambo yegolide -

* Ukuze ugcine yonke impilo ende ye-LED, ifektri ye-BestLED isebenzisa ucingo oluphezulu lwegolide oluhlanzekile ngaphakathi kokuxhumeka kwesekethe

- Ukupakisha kwe-LED -

* Singakwazi ukupakisha le-LED nganoma iyiphi inombolo yamaphakeji bese siqopha noma sigobele izikhonkwane ze-LED njengesidingo sakho.

- IR ehlobene ye-IR -

- Inqubo Yokukhiqiza -

- I -IR hole hole-hole -