- usayizi we-5 mm ir ir-hole LED -

* Le ngephakethe le-LED ye-Phole nalo liyatholakala ku-UV LED, i-amber led, i-LED ephuzi, i-5mm eluhlaza okotshani i-LED,

- ngokusebenzisa-hole ir i-LED radiant -

* Imibala esithombeni yathathwa ngekhamera, sicela uthathe umbala ongifikayo njengezinga.

- Ngokusebenzisa-hole IR LED Parameter -

Ukulinganisa okuphezulu ngokuphelele eTA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	70mw
Pulse Forward Current	IFP	500mA
Forward Current	IF	50mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5 Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Izici ze-Optical and Electrical ( T C = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=20mA
		1.3	1.5	1.7	V	IF=50mA
			2.2		V	IF=500mA
Rediant Intensitye	Ee		2	4	mw/sr	IF= 20mA
		8		12	mw/sr	IF=50mA
			92		mw/sr	IF=500mA
Luminous Power	PO		4		mw	IF=20mA
			15		mw	IF=50mA
			150		mw	IF=500mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Ukuxhumeka kocingo lwegolide -

* Ukuze ugcine wonke umuntu we-LEP LELD PLASP LEFLPAN LELLS, i-Bedy Factory basebenzise i-High Pure Pure Opene Wire yokuxhumana kwesizungu ngaphakathi

- Ir LED Paking -

* Singapakisha leli mvumelwe nganoma iyiphi inombolo yamaphakeji futhi siboshwe noma sigobe izikhonkwane ze-LED njengesidingo sakho.