- Awọn atupa LED infurarẹẹdi -

503FIRC-74L / 14I100-20A

- Iwọn ti 5 mm Nipasẹ iho iho -

* Apo package LED nipasẹ-iho tun wa ni UV UV, Amber LED, Yellow LED, 5mm Green nipasẹ-iho LED, 5mm bulu nipasẹ-iho LED ect. *

- Nipasẹ-iho LED radiant -

* Awọn awọ ninu fọto ti mu nipasẹ kamẹra, jọwọ mu awọ emitting gangan bi boṣewa.

- Awọn ipele Itanna -

Absolute Maximum Ratings At Ta=25℃  Parameter Symbol Rating Power Dissipation Pd  200mw  Pulse Forward Current IFP  300mA  Forward Current IF  100mA  Reverse Voltage VR 5V Junction Temperature Tj 115°C Operating Tempertature Topr -40 - +80°C Storage Tempertature Tstg -40 - +100°C Soldering Temperature Tsol 260°C Electro-Static-Discharge(HBM) ESD 3000v Warranty Time 5Years Antistatic bag Piece 1000Back *Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. *Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C Awọn ẹya ara ẹrọ Optical ati Electrical ( T c = 25 ℃ ) Parameter Symbol Min Typ Max Unit Test Condition Forward Voltage VF 1.5  1.6 1.9 V IF=20mA 1.6 1.8 2.1 V IF=60mA 1.9 2.0 2.5 V IF=100mA Luminous Flux Φ 0.08 lm IF=20mA 0.2 lm IF=60mA 0.25 lm IF=100mA Luminous Power PO 6 15 mw IF=20mA 20 35 mw IF=60mA 35 50 mw IF=100mA Radiant Intensity Ee 110 140 mw/sr IF=100mA Peak Wavelength λP 740 745 nm IF=20mA Half Width Dl 24 nm IF=20mA Viewing Half Angle 2q1/2 ±10 deg IF=20mA Reverse Current IR 10 uA VR=5V *Luminous Intensity is measured by ZWL600. *q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. *lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Lati tọju gbogbo igbesi aye igbesi aye LED, ile-iṣẹ BestLED lo okun waya goolu giga fun asopọ asopọ inu

- Iṣakojọpọ LED -

* A le di LED yii pẹlu nọmba eyikeyi ti awọn idii ati tẹ tabi tẹ awọn pinni LED bi ibeere rẹ.

- IR IR ti o ni ibatan

- Ilana iṣelọpọ -

- T hrough-iho IR LED -