Gbólólólóhùn Asiri: Asiri rẹ ṣe pataki pupọ si wa. Ile-iṣẹ wa ṣe ileri lati ṣe sọ alaye ti ara ẹni si eyikeyi ifihan pẹlu awọn igbanilaaye rẹ.
Apo: Apoti apoti
Ise sise: 1000000000 pcs/week
Iṣowo: Ocean,Land,Air
Ibi ti Oti: Ṣaina
Ipese Agbara: 7000000000 pcs/week
Ijẹrisi: GB/T19001-2008/ISO9001:2008
Koodu HS: 8541401000
Port: SHENZHEN
Iru owo sisan: T/T,Paypal
Incoterm: FOB,EXW,FCA
Aṣeṣe No.: 503IRBT-94L/10I50-45A
Brand: Ti o dara ju mu
Iru Ipese: Atilẹba ọja
Awọn Ohun Elo Itọkasi: iwe data
Ibi Ti Oti: Ṣaina
ẹya: LED
Iru Package: Nipasẹ Iho
Application: Electronic Products
Formation: Gold Thread
Type: Infrared Led
IR LED Wavelength: 940nm
940nm IR LED Polarity: Short Pin Mark Cathode
940nm IR LED Antistatic Bag: 1000PCS/Bag
940nm IR LED Type Of Lens: Blue Transparent
940nm IR LED Beam Width: 45 Degree
940nm IR LED Current: 50mA
940nm IR LED Chip Size: 245um
940nm IR LED Radiation Intensity: 8-12mw/sr
Ta sipo: | Piece/Pieces |
---|---|
Iru Apoti: | Apoti apoti |
- Size: 5.0*H8.7mm - Chip Number:1 chips - Color: 940nm - Type: Blue Lens - Chip brand: Tyntek |
- Different color are available - Different wavelength are available
- Warranty: 5 Years
- RoHS, REACH, EN62471 |
- Uniform light output - Long life-solid state reliability
- Low Power consumption
-Anti UV epoxy resin package -High temperature resistance |
* Package ti iho ti a fi mule wa tun wa ni UV LED, Amber LED, LED Yellow, 5mm alawọ ewe ti o yori, 5mm buluu nipasẹ iho-iho nipasẹ iho-iho nipasẹ iho-iho nipasẹ iho-iho
* Awọn awọ ninu fọto naa ni a mu nipasẹ kamẹra, jọwọ gba awọ imukuro gangan bi.
Awọn idiyele ti o pọju to gaju ni Ta = 25 ℃
Parameter |
Symbol |
Rating |
Power Dissipation |
Pd |
70mw |
Pulse Forward Current |
IFP |
500mA |
Forward Current |
IF |
50mA |
Reverse Voltage |
VR |
5V |
Junction Temperature |
Tj |
115°C |
Operating Tempertature |
Topr |
-40 - +80°C |
Storage Tempertature |
Tstg |
-40 - +100°C |
Soldering Temperature |
Tsol |
260°C |
Electro-Static-Discharge(HBM) |
ESD |
3000v |
Warranty |
Time |
5 Years |
Antistatic bag |
Piece |
1000Back |
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. |
||
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C |
Opitical ati awọn abuda itanna ( t c = 25 ℃ )
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Test Condition |
Forward Voltage |
VF |
1.1 |
1.2 |
1.4 |
V |
IF=20mA |
1.3 | 1.5 | 1.7 |
V |
IF=50mA | ||
2.2 |
V |
IF=500mA | ||||
Rediant Intensitye |
Ee |
|
2 |
4 |
mw/sr |
IF= 20mA |
8 |
12 |
mw/sr | IF=50mA | |||
|
92 |
|
mw/sr | IF=500mA | ||
Luminous Power |
PO |
4 |
mw | IF=20mA | ||
15 |
mw |
IF=50mA |
||||
150 |
mw |
IF=500mA |
||||
Peak Wavelength |
λP |
|
940 | 950 |
nm |
IF=20mA |
Half Width |
Dl
|
|
25 |
|
nm |
IF=20mA |
Viewing Half Angle |
2q1/2 |
|
±22 |
|
deg |
IF=20mA |
Reverse Current |
IR |
|
|
5 |
uA |
VR=5V |
*Luminous Intensity is measured by ZWL600. |
||||||
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. |
||||||
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. |
* Ni ibere lati tọju gbogbo ọkan ninu igbesi aye gigun ti LED, iṣelọpọ ti o dagba sii lo waya funfun giga giga fun asopọ Center
* A le ṣe idiwo eyi yo pẹlu nọmba eyikeyi ti awọn apoti ati taped tabi tẹ awọn pinni LED bi ibeere rẹ.
Tẹli: 86-0755-89752405
Foonu alagbeka: +8615815584344
Imeeli: amywu@byt-light.comAdirẹsi: Building No. 1 Lane 1 Liuwu Nanlian The Fifth Industry Area , Longgang, Shenzhen, Guangdong China
Aaye ayelujara: https://yo.bestsmd.com
Gbólólólóhùn Asiri: Asiri rẹ ṣe pataki pupọ si wa. Ile-iṣẹ wa ṣe ileri lati ṣe sọ alaye ti ara ẹni si eyikeyi ifihan pẹlu awọn igbanilaaye rẹ.
Fọwọsi alaye diẹ sii ki o le wọle si ọ ni iyara
Gbólólólóhùn Asiri: Asiri rẹ ṣe pataki pupọ si wa. Ile-iṣẹ wa ṣe ileri lati ṣe sọ alaye ti ara ẹni si eyikeyi ifihan pẹlu awọn igbanilaaye rẹ.