- 625nm LED -

5050FRC-62L / 10

Wọpọ 5050 SMD LED ni awọn pinni 6, awọn pinni mẹta wa ni ẹgbẹ kọọkan ti SMD LED. Ati awọn pinni kọọkan yoo sopọ ni chiprún LED inu pẹlu cathode tabi anode. Bi a ṣe le rii ninu aworan naa, 5050 SMD LED wọnyi ni chiprún mẹta inu, chiprún mẹta wọnyi bi asopọ ti o jọra inu ti SMD LED. Ewo ni o le ṣe awọn eerun 3 ni akoko kanna pẹlu lọwọlọwọ 60mA. 5050FRC-62L / 10 jẹ SMD 625nm LED ti o ni 3 245 * 245um inu, imọlẹ le de ọdọ 1500-2500nm nigbati o n ṣiṣẹ. Agbara Igbi agbara jẹ 620-625nm ati igbi gigun ni 630-635nm. Iwọnyi ga pupa pupa SMD LED, ati agbara jẹ 0.2W. Shenzhen Best LED Opto-electronic Co., Ltd tun le pese 630nm mu, 635nm mu, 640nm mu, 645nm mu, 660nm mu, 680nm mu, 700nm mu, 710nm mu, 720nm mu, 730nm mu, 740nm mu, 750nm mu, 760nm mu, 770nm mu, 780nm mu, 790nm mu, 800nm ​​mu, 810nm mu, 820nm mu, 830nm mu, 840nm mu, 850nm mu, 860nm mu, 870nm mu, 880nm mu, 890nm mu, 900nm mu, 9 20nm mu, 940nm mu , 950nm mu, 980nm mu, 1000nm mu, 1050nm mu, 1100nm mu, 1200nm mu, 1300nm mu, 1500nm mu ect. Ti o ba nilo eyikeyi LED nipa eyi, jọwọ c ontact wa fun alaye diẹ sii nipa rẹ ~

- Dimension Parameters-

Ọran SMD LED wọnyi tun wa fun IR LED, UV UV, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ṣiṣejade Awọ -

- Awọn ipele Itanna -

Idiwọn Iwọn Ti o pọ julọ Ni Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Awọn ẹya ara ẹrọ Optical ati Electrical ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.9	2.1	2.4	V	IF=60mA
			2.3	2.6	V	IF=180mA
			2.4	2.8	V	IF=300mA
Luminous Flux	ΦVI	6		9	lm	IF=60mA
				25	lm	IF=180mA
Luminous Intensity	IV	1500		2500	mcd	IF=60mA
Lumiuous Power	PO	35		55	mw	IF=60mA
				180	mw	IF=180mA
				300	mw	IF=300mA
Peak Wavelength	λP		632		nm	IF=60mA
Dominant Wavelenth	λd	620	625	630	nm	IF=60mA
Half Width	Dl		16		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Asopọ Waya Golden -

- Iṣakojọpọ -

* A ṣajọ rẹ pẹlu iṣakojọpọ igbale lẹhin teepu rẹ bi kẹkẹ

- Ohun elo -

- Red LED ti o ni ibatan -

- Gbóògì -

- Lilo LED SMD -