-Ubukhulu be-5 mm nge-LED - HOL-

* I-PIN emfutshane iyinkobe.

* 1. Yonke imilinganiselo ikwimilinganiselo; 2. Ukunyamezelana yi- ± 0.20 mm ngaphandle kokuba kuphawulwe ngenye indlela.

Le meko ikwafumaneka kwi-blue eblowu ekhokelayo, umngxunya obomvu, i-LED, i-UP ye-IR, i-IR, i-Amber Cods, etyheli i-LED, njl.

-Umngxunya we-Hole

* Imibala kwifoto yathathelwa yikhamera, nceda uthathe umbala wokwenyani njengomgangatho.

-Iiparamitha zombane -

Eyona ratings iphezulu kwi-TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Iimpawu ze-Optical nezoMbane ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Unxibelelwano lwe-Wire lweGolden

* Ukwenzela ukugcina wonke umntu we-LED's ASPEAN, ifektri ebalaseleyo isebenzisa i-wire yegolide ecocekileyo yegolide ngaphakathi konxibelelwano lwesekethe