-Ubukhulu be-5 mm ir kwi-LED-Hole ye-LED -

-Umngxunya we-Ir ye-LED

* Imibala kwifoto yathathelwa yikhamera, nceda uthathe umbala wokwenyani njengomgangatho.

-Umsebenzi we-Ir ye-IR ye-LOH-

Eyona ratings iphezulu kwi-TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	220mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Iimpawu ze-Optical nezoMbane ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.3	1.4	1.6	V	IF=50mA
		1.5	1.6	1.8	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		35	60	mw/sr	IF= 50mA
		70		95	mw/sr	IF=100mA
			860		mw/sr	IF=1000mA
Luminous Power	PO		25		mw	IF=50mA
			52		mw	IF=100mA
			500		mw	IF=1000mA
Peak Wavelength	λP	845	850		nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.