Kuuza Vitengo:	Piece/Pieces
Aina ya Furushi:	Sanduku la katoni

Je! Unafikiri LED zote za infrared haziwezi kuona kwa macho yetu uchi? Halafu unaweza kuikosea juu ya kesi hii ~ infrared LED hufanya taa nyekundu wakati wanafanya kazi. Lakini wimbi la muda mrefu zaidi, mwangaza mdogo nyekundu utaendelea. Kama tunavyojua, kuna nguvu kali wakati ulitumia diode ya laser ya 770nm, lazima utumie kwa uangalifu vinginevyo utajichoma. Lakini kwa hili, tulifunga hii na chip 770nm ya LED na lensi wazi. Ambayo ni nambari ya sehemu ya kutoa diode ni 503FIRC-77L/14I100-60A. 770nm infrared LED hutumiwa sana kwa taa ya LED kukua, mashine ya matibabu ya infrared ect. Kuna pia kuwa na aina ya kutazama kwenye LED hii ya shimo kwa chaguo lako. Pembe tofauti za kutazama zitafanya matokeo tofauti ya taa, unaweza kuchagua yoyote yao kwa mradi wako. Je! Unahitaji emitter ya LED ya 770nm kwa mradi wako? Wasiliana nasi ujue, bidhaa hii na kuegemea kwa hali ya maisha ya muda mrefu na matumizi ya nguvu ya chini hayakuruhusu kukatishwa tamaa.

- Size: 5.0*H8.7mm - Chip Number:1 chip - Color: 770nm LED - Type: water clear - Chip brand: Tyntek

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- saizi ya 5 mm kupitia shimo -shimo -

*Kifurushi hiki cha LED kupitia shimo pia kinapatikana katika LED ya UV, Amber LED, LED ya manjano, 5mm kijani kupitia shimo la LED, 5mm bluu kupitia shimo la ECT.*

- Kupitia shimo LED Radiant -

*Rangi kwenye picha ilichukuliwa na kamera, tafadhali chukua rangi halisi ya kutoa kama kiwango.

- Vigezo vya umeme -

Ukadiriaji wa kiwango cha juu kabisa katika TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
1000pcs weight	Bag	0.31g
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Tabia za macho na umeme ( T C = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5	1.6	1.8	V	IF=20mA
		1.7	1.8	2.1	V	IF=60mA
		2.0	2.3	2.5	V	IF=100mA
Luminous Flux	Φ		0.03		lm	IF=20mA
			0.09		lm	IF=60mA
			0.14		lm	IF=100mA
Luminous Power	PO	15		25	mw	IF=20mA
		45		55	mw	IF=60mA
		70		90	mw	IF=100mA
Radiant Intensity	Ee	80		90	mw/sr	IF=100mA
Peak Wavelength	λP	760	770	780	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.