- Taa za LED za infrared -

503FIRC-74L / 14I100-45A

Sio tu 730nm infrared LED inayoweza kutumika katika tiba ya infrared LED , lakini pia 730nm LED, 740nm LED, 760nm LED inaweza kutumika sana katika aina ya mashine ya matibabu ya IR LED. Pia kuna aina za kutazama pembe kwenye hii-shimo la LED kwa chaguo lako. Pembe tofauti za kutazama zitafanya matokeo tofauti ya taa, unaweza kuchagua moja yao kwa mradi wako. Je! Unahitaji mtoaji wa LED wa 740nm kwa mradi wako? Wasiliana nasi tunajua, bidhaa hii yenye uaminifu wa maisha marefu hali dhabiti na matumizi ya chini ya nguvu hautakuruhusu kutamauka. Kama tunavyojua, infrared LED hutoa taa nyekundu wakati wanafanya kazi. Je! Unafikiria taa zote za infrared haziwezi kuona kwa macho yetu uchi? Basi unaweza kuwa na makosa kwenye kesi hii ~ Lakini urefu wa urefu zaidi, mwangaza mwekundu utapata. Kama tunavyojua, kuna nguvu kubwa wakati ulitumia diode ya laser ya 740nm, lazima uitumie kwa uangalifu vinginevyo utajichoma. Lakini kwa hili, tuliweka hii na chip ya 740nm ya LED na lens wazi. Ambayo ni diode nyepesi tu .

- Ukubwa wa 5 mm Kupitia-shimo la LED -

- Kupitia-shimo la LED Radiant -

* Rangi kwenye picha ilichukuliwa na kamera, tafadhali chukua rangi halisi inayotoa kama kawaida.

- Kupitia-shimo Kigezo cha LED -

Viwango vya juu kabisa kwa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Sifa za macho na Umeme ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uunganisho wa waya wa dhahabu -

* Ili kuweka kila urefu wa maisha ya LED, kiwanda cha BestLED hutumia waya safi wa dhahabu safi kwa unganisho la mzunguko wa ndani

- Ufungashaji wa LED -

* Tunaweza kupakia LED hii na idadi yoyote ya vifurushi na kunasa au kunama pini za LED kama mahitaji yako.

- LED inayohusiana ya IR -

- Mchakato wa Uzalishaji -

- T -shimo la mwangaza IR -