- Taa za LED za infrared -

503FIRBT-81L / 14I100-45A

- Ukubwa wa 5mm IR kupitia shimo la LED -

- Kupitia-shimo IR LED Radiant -

* Rangi kwenye picha ilichukuliwa na kamera, tafadhali chukua rangi halisi inayotoa kama kawaida.

- Kupitia-shimo IR Kigezo cha LED -

Viwango vya juu kabisa kwa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	220mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	150mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Tabia za macho na umeme ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.8	V	IF=50mA
		1.6	1.8	2.0	V	IF=100mA
			2.5		V	IF=1000mA
Rediant Intensitye	Ee		27		mw/sr	IF=50mA
		40		60	mw/sr	IF=100mA
			510		mw/sr	IF=1000mA
Luminous Power	PO		50		mw	IF=50mA
			80		mw	IF=100mA
			800		mw	IF=1000mA
Peak Wavelength	λP	800	805	810	nm	IF=100mA
Half Width	Dl		25		nm	IF=100mA
Viewing Half Angle	2q1/2		±22		deg	IF=100mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uunganisho wa waya wa dhahabu -

* Ili kuweka kila urefu wa maisha ya LED, kiwanda cha BestLED hutumia waya safi wa dhahabu safi kwa unganisho la mzunguko wa ndani

- Ufungashaji wa IR ya IR -

* Tunaweza kupakia LED hii na idadi yoyote ya vifurushi na kunasa au kunama pini za LED kama mahitaji yako.

- LED inayohusiana ya IR -

- Mchakato wa Uzalishaji -

- T -shimo la mwangaza IR -