- 625nm LED -

5050FRC-62L / 10

Kawaida 5050 SMD LED ina pini 6, kuna pini tatu kila upande wa LED ya SMD. Na kila pini itaunganisha chip ya LED ndani na cathode au anode. Kama tunaweza kuona kwenye picha, hizi 5050 SMD LED zina tatu ndani, hizi chip tatu kama unganisho sawa ndani ya SMD LED. Ambayo inaweza kuendeshwa chips 3 kwa wakati mmoja na 60mA ya sasa. 5050FRC-62L / 10 ni 625nm LED SMD ambayo ina 3 245 * 245um ndani, mwangaza unaweza kufikia 1500-2500nm wakati inafanya kazi. Wavelength kubwa ni 620-625nm na urefu wa urefu wa urefu ni 630-635nm. Hizi ni mwangaza wa juu mwekundu wa SMD LED, na nguvu ni 0.2W. Shenzhen Best LED Opto-elektroniki Co, Ltd pia inaweza kutoa 630nm iliyoongozwa, 635nm iliongozwa, 640nm iliongozwa, 645nm iliongozwa, 660nm iliongozwa, 680nm iliongozwa, 700nm iliongozwa, 710nm iliongozwa, 720nm iliongozwa, 730nm iliongozwa, 740nm iliongozwa, 750nm iliongozwa, 760nm kuongozwa, 770nm kuongozwa, 780nm kuongozwa, 790nm kuongozwa, 800nm ​​kuongozwa, 810nm kuongozwa, 820nm kuongozwa, 830nm kuongozwa, 840nm kuongozwa, 850nm kuongozwa, 860nm kuongozwa, 870nm kuongozwa, 880nm kuongozwa, 890nm kuongozwa, 900nm kuongozwa, 9 20nm kuongozwa, 940nm kuongozwa , 950nm iliongozwa, 980nm iliongozwa, 1000nm iliongozwa, 1050nm iliongozwa, 1100nm iliongozwa, 1200nm iliongozwa, 1300nm iliongozwa, 1500nm iliongoza ect. Ikiwa unahitaji LED yoyote juu ya hii, tafadhali c ontact sisi kwa maelezo zaidi juu yake ~

- Vigezo vya Vipimo-

Kesi hizi za SMD LED zinapatikana pia kwa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Kutoa Rangi -

- Vigezo vya Umeme -

Viwango vya juu kabisa kwa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Tabia za macho na umeme ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.9	2.1	2.4	V	IF=60mA
			2.3	2.6	V	IF=180mA
			2.4	2.8	V	IF=300mA
Luminous Flux	ΦVI	6		9	lm	IF=60mA
				25	lm	IF=180mA
Luminous Intensity	IV	1500		2500	mcd	IF=60mA
Lumiuous Power	PO	35		55	mw	IF=60mA
				180	mw	IF=180mA
				300	mw	IF=300mA
Peak Wavelength	λP		632		nm	IF=60mA
Dominant Wavelenth	λd	620	625	630	nm	IF=60mA
Half Width	Dl		16		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uunganisho wa waya wa Dhahabu -

- Ufungashaji -

* Tunakipakia na kufunga utupu baada ya mkanda kama reel

- Maombi -

- LED Nyekundu inayohusiana -

- Uzalishaji -

- Matumizi ya LED ya SMD -