- Mabone a LED a Infrared -

50FIRC-70L / 14I100-60A

Leseli la 700nm IR le fumaneha ho Shenzhen Best LED Opto-electronic Co., Ltd. Peak wavelength ke 700nm, ho shebella angle 60 degree ( ± 30 ° ), chip size ke 350um * 350um, tlhahiso ea motlakase mW @ 20mA le mofuta o fetisang motlakase oa 1.8V max. 2.3V @ 20 MA. Re kentse LED ena ea infrared ea 700nm ka lense e hlakileng ea mm epoxy. Joaloka LED e nang le masoba, ho na le mefuta ea likhutlo e shebelloang eo u ka e khethang, haeba leihlo lena la ho shebella ka likhato tse 60 le sa khone ho fihlela tlhoko ea hau, ikutloe u lokolohile ho ikopanya le rona 'me u re tsebise lipotso tsa hau. Ebe re tla e hlahisa joalo ka kopo ea hau. Ntle le moo, bakeng sa 700nm LED, ho boetse ho na le mefuta ea liphutheloana tse fumanehang Fekthering e Ntle ea LED, joalo ka ha re ka fetola 'mala oa lense hore o tšoane le boputsoa bo bobebe kapa boputsoa bo tebileng joalo ka ts'ebeliso ea hau, haeba boholo ba 5mm bo le boholo haholo bakeng sa hau, re ka e etsa ka 3mm ect. Na o hloka LED ea 700nm bakeng sa projeke ea hau? Iteanye le rona bakeng sa lintlha tse ling ~

- Boholo ba 5mm LED ea lesoba -

Pini e khuts'oane ke cathode *

* Li -LED tsena tse 5mm ka lesoba le tsona lia fumaneha bakeng sa LED e mosehla, Amber LED, UV LED le li-IR tse ling tsa ect *

- Ka har'a lesoba LED e khanyang -

* Mebala e setšoantšong e nkuoe ka kh'amera, ka kopo nka 'mala o hlasimollang o tloaelehileng.

- 700nm LED XY -

- Lisebelisoa tsa Motlakase -

Feletseng Boholo Ratings Ha Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Radiant Intensity	Ee	50		60	mw/sr	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, fektheri ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Ho paka ka LED -

* Re ka thoto LED ena le palo efe kapa efe ea liphutheloana ebe o tlanya kapa koba lithakhisa tsa LED joalo ka tlhoko ea hau.

- E amana -

- Tsamaiso ea Tlhahiso -

- T ea sekoti sa IR LED -