Ho rekisa lihlopha:	Piece/Pieces
Mofuta oa Sephutheloana:	Lebokose la Carton

Na u nahana hore kaofela ha li-alone li ke ke tsa bona ka mahlo a rona a hlobotseng? Ebe u ka e-na le phoso ka nyeoe ena ~ Ledd e ntša khanya e khubelu ha e sebetsa. Empa nako e telele e ntse e tsamaea, khanya e khubelu e fokolang eo u tla e bua. Joalo ka ha re tseba, ho na le matla a matla ha u sebelisa Diode ea laser ea 770m, u tlameha ho e sebelisa ka hloko ho ne ho tla chesa. Empa bakeng sa sena, re ile ra paka sena ka li-Chip tse 770Nm lense e hlakileng. Ke nomoro e bobebe ea DIODITITITITITITITITY ke 503firc-77l / 14i100E. 770nm Leseli le sebelisoang haholo ke khanya ea leseli, mochini o ikhethileng oa pheko. Ho boetse ho na le mefuta ea ho shebella ka lehlakoreng lena ka lesoba le lebisitseng. Seleng e fapaneng ea ho shebella e tla etsa hore ho be le litholoana tse fapaneng, o ka khetha e mong oa bona bakeng sa morero oa hau. Na o hloka Emitter e ka bang 770Nm e emeng bakeng sa morero oa hau? Ikopanye le Rona oa tseba, sehlahisoa sena se nang le ts'ehetso e telele ea boemo le ts'ebeliso e tlase ea matla a mangata ha a u ahlole.

- Size: 5.0*H8.7mm - Chip Number:1 chip - Color: 770nm LED - Type: water clear - Chip brand: Tyntek

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- boholo ba limithara tse 5 ho tloha-Hole Led -

* Sena ka sephutheloana sena se fumaneha le Uv Led, Amber Level

- ka-hole led radiant -

* Mebala e setšoantšong e ne e nkuoe ke kh'amera, ka kopo nka 'mala oa ho emisa ka mokhoa o hlakileng joaloka tekanyetso.

- Li-parameter tsa motlakase -

Litekanyetso tse phahameng tse phahameng ho ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
1000pcs weight	Bag	0.31g
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Litšobotsi tsa mantlha le tsa motlakase ( t c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5	1.6	1.8	V	IF=20mA
		1.7	1.8	2.1	V	IF=60mA
		2.0	2.3	2.5	V	IF=100mA
Luminous Flux	Φ		0.03		lm	IF=20mA
			0.09		lm	IF=60mA
			0.14		lm	IF=100mA
Luminous Power	PO	15		25	mw	IF=20mA
		45		55	mw	IF=60mA
		70		90	mw	IF=100mA
Radiant Intensity	Ee	80		90	mw/sr	IF=100mA
Peak Wavelength	λP	760	770	780	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.