- Mabone a LED a Infrared -

503IRBT-94L / 16I120-45A

Leseli lena la infrared la 5mm le ne le pakiloe ke lense e putsoa. Ena ke Emitter ea infrared LED, batho ba bang ba kanna ba nahana hore re ke ke ra bona leseli la mmala ha LED ena ea infrared e sebetsa. Empa ha e le hantle, re khona ho bona letheba le lenyane / lefifi le lefubelu ha mabone a mang a matla a 940nm infrared LED a sebetsa. Morero o mong o kanna oa se amohele lebone lena le lefubelu, ebe re paka sena ka lense e putsoa ho koahela lebone lena le leng. Na o hloka LED ea 940nm e nang le tlhahiso ea 0.4W bakeng sa projeke ea hau? Iteanye le rona bakeng sa mohatla o eketsehileng ka eona. Hape ho na le mofuta oa pono eo u ka e khethang.

- Boholo ba 5mm IR In-hole LED -

* Boholo bona bo fumaneha bakeng sa li-LED tse ling, joalo ka UV LED, IR LED (810nm LED, 850nm LED ...), Amber LED, Yellow LED, RGB LED, Mabone a LED a panya *

- Ho sebetsa ka lesoba la IR LED -

* Mebala e setšoantšong e nkuoe ka kh'amera, ka kopo nka 'mala o hlasimollang o tloaelehileng.

- Phaliso ea IR ea marang-rang e tsamaeang ka lesoba -

Feletseng Boholo Ratings Ha Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, feme ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Paka ea LED ea IR -

* Re ka thoto LED ena le palo efe kapa efe ea liphutheloana ebe o tlanya kapa koba lithakhisa tsa LED joalo ka tlhoko ea hau.

- LED e amanang ea IR -

- Tsamaiso ea Tlhahiso -

- T ea sekoti sa IR LED -