5050FRYGIRC

Batho ba sebelisang LED ho fetola matla a khanya hore e be matla a ka hare, a ka khothalletsang kholo ea lisele . LED e hlahisa lebone le batang le sa hlahiseng feberu e phahameng ebile e sa chese letlalo. E na le phello e kholo ho lokisa letlalo le tsofetseng, ho nchafatsa letlalo le ho soeufala. Joalokaha re tseba, 'mala o fapaneng oa LED o na le bokahohle bo fapaneng, bo bolelang, bokahohle bo fapaneng bo tla ba le phello e fapaneng letlalong. Ka tloaelo, batho ba sebelisa wavelength joalo ka 'mala o moputsoa oa 460nm LED, 470nm, 580nm mosehla LED, 590nm LED, 630nm Red LED, 660nm LED, 810nm LED, 830nm LED, 840nm LED ect bakeng sa mochini oa botle ba LED

Molemo ka ho fetisisa LED fektheri ka sephutheloana ladica i fapaneng ka hare ho LED ka tlhokahalo ea hao. Sehlahisoa se ikhethileng sa moeti e mong le e mong sea ikhetha. Iteanye le rona 'me u iketsetse moralo oa hau bakeng sa mochini oa hau! Na u ka etsa li-wavelengths tse ling ka' nete? Ha ho na bothata.

- Size: 5.0*5.0*1.0mm - Chip Number: 4 chips - Color:  660nm 580nm 530nm 830nm LED - Type: Surface mount device - Chip brand: Epistar

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- Methati ea Methati -

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Lisebelisoa tsa Motlakase -

Parameter	Symbol	Rating
		Red	Green	Yellow	IR
Power Dissipation	Pd	50mw	70mw	50mw	70mw
Pulse Forward Current	IFP	100mA	100mA	100mA	100mA
Forward Current	IF	30mA	30mA	30mA	30mA
Reverse Voltage	VR	5V	5V	5V	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	Red	VF	1.9	2.0	2.4	V	IF=20mA
	Green		2.8	3.1	3.4
	Yellow		1.9	2.0	2.4
	IR		1.3		1.6
Luminous Intensity	Red	IV	500		700	mcd	IF=20mA
	Green		1200		1500
	Yellow		500		700
	IR		5		10	mw/sr
Peak Wavelength	Red	λP	650	660	670	nm	IF=20mA
	Green		520	530	535
	Yellow		580	585	590
	IR		820	830	840
Half Width	Red	Dl		18		nm	IF=20mA
	Green			25
	Yellow			18
	IR			22
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current	Red	IR			5	uA	VR=5V
	Green				5
	Blue				5
	White				5
*Luminous Intensity is measured by ZWL600.
*2q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, feme ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- E amanang le 5050 SMD LED -

- Tlhahiso -

- Sebelisa -