Ka nako e 'ngoe, re bua ka' mala o mofubelu LED, 'mala o moputsoa LED, kapa mmala o motala oa LED. Empa sena sohle ke bakeng sa mmala o bonahalang oa leseli. Joale ho thoe'ng ka leseli leo re sa le boneng ka mahlo? --- Leseli la infrared, e leng ponahalo e sa bonahaleng eo hangata e hlalosoang e na le bolelele ba bolelele ba bolelele bo fetang 700nm (nanometers). Joale batho ba kanna ba ipotsa, kaha 850nm LED e maemong a sa bonahaleng, motho ha a tlameha ho bona LED ea 850nm ha e sebetsa. Empa, 'nete ke hore, batho ba na le letheba le lefubelu ha LED ena e ntse e sebetsa. Ka lehlakoreng le leng, joalo ka ha re bona, 850nm LED bare die e ka phuthoa ka linyeoe tse fapaneng, joalo ka 3528 SMD LED kesi e latelang kapa nyeoe e ngoe e kang 2835 SMD LED, 5730 SMD LED, 3014 SMD LED ect. Joale

- Methati ea Methati -

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ho hlahisa mmala -

- Lisebelisoa tsa Motlakase -

Tekanyo e felletseng ea boholo bo holimo ho Ta = 25 25

Parameter	Symbol	Rating
Power Dissipation	Pd	230mW
Pulse Forward Current	IFP	200mA
Forward Current	IF	30mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	2000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.3		1.7	V	IF=20mA
Pulse Forward Voltage	VF		2.3		V	IFP=200mA
Radiant Intensity	IE	5		10	mw/sr	IF=20mA
Peak Wavelength	λP	845	850	858	nm	IF=20mA
Total Radiated Power	PO		3.0		mw	IF=20mA
Half Width	Dl		50		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
Rise Time	Tr		25		ns	IF=20mA
Fall Time	Tf		13		ns	IF=20mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Leseli la 850nm -

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, fektheri ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- Tlhahiso -

- Sebelisa -