- Leseli la 660nm -

EA-5050-FRC-66L / 14

0.2W SMD LED 5050 3-chips 660nm LED ke lebone le khubelu le khanyang le khanyang, le sebelisoang haholo indastering ea botle, kholo ea limela, tlatsetso ea leseli, kapa lits'ebetso tse ling tse ikhethang. Ka lebaka la theko ea 660nm LED, li-LED tsena tse khubelu ha li tumme haholo morerong oa mabone a LED kapa lebone la LED. Leha ho le joalo, 660nm LED e ntse e tsebahala hobane e sebetsa. Bapisa le LED e phunyeletsang ka 660nm, 660nm SMD LED e tla sebetsa hantle molemong oa ho chesa mocheso. Ka lehlakoreng le leng, SMD LED e boetse e na le boholo bo bonyenyane ho feta LED ea lesoba, e leng bonolo ho lekana le boto ea PCB le mochini o iketsang oa ho tjheseletsa. Joalokaha re tseba, ho na le maemo a mararo ho 5050 SMD LED. E le hore Nyeoe ea 5050 SMD LED e ka phuthoa ka li-chips tse 3 kahare. Bakeng sa projeke e itseng, chip e le 'ngoe feela e ka se fihlelle tlhoko eo. Bakeng sa ho eketsa tlhahiso le radiation ho LED e le 'ngoe, re tla phuthela sena ka 3 chip e tšoanang ea LED ho 5050 SMD LED ho fihlela radiation e matla le ho feta. Ho na le mefuta ea chip ea LED e ka kenngoang ka 5050 SMD LED e le 'ngoe, e ka bang chip e fapaneng e 3 kapa 3 chip e tšoanang. Ho ka ho feletseng ho fihlela ho tlhokahalo ea hao. Haeba chip e le 'ngoe ea 660nm ea LED e sa khone ho fihlela tlhoko ea hau, ena e ke ke ea u lumella ho nyahama. Ho hlahisa khanya e sa tšoaneng, ho ts'epahalla maemo a bophelo bo bolelele le ts'ebeliso e tlase ea matla ke monyetla oohle oa li-chips tsena tse 3 660nm SMD LED. Iteanye le rona bakeng sa tlhaiso-leseling e batsi ka eona ~

- teba Parameters-

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ho hlahisa mmala -

- Lisebelisoa tsa Motlakase -

Lintlha tse felletseng tsa boholo bo felletseng ho Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	1.9	2.3	V	IF=60mA
		1.9	2.1	2.4	V	IF=180mA
		2.0	2.2	2.5	V	IF=300mA
Luminous Intensity	ΦVI	2.7		3.8	lm	IF=60mA
		9		13	lm	IF=180mA
		12		18	lm	IF=300mA
Lumiuous Power	PO	35		55	mw	IF=60mA
		120		180	mw	IF=180mA
		200		300	mw	IF=300mA
Peak Wavelength	λP	655	660	665	nm	IF=60mA
Dominant Wavelenth	λd	640	645		nm	IF=60mA
Half Width	Dl		17		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Khokahano ea terata ea khauta -

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- Ts'ebeliso -

- Leseli le Lefubelu le Amanang -

- Tlhahiso -

Ts'ebeliso ea LED ea 660nm -