- 660nm LED -

5050FRC-66L / 14

0.2W SMD LED 5050 3-machipisi 660nm LED yakadzika tsvuku mwenje inoburitsa diode, iyo inoshandiswa zvakanyanya muhunyanzvi indasitiri, kukura kwezvirimwa, kuwedzera kwechiedza, kana zvimwewo zvakakosha zvinoshandiswa. Nekuda kwemubhadharo we660nm LED, aya matsvuku LED haanyanyo kufarirwa mu LED mwenje purojekiti kana LED Mwenje. Nekudaro, 660nm LED ichiri kuwana mukurumbira nekuti iri kushanda. Enzanisa neiyo-inoburitsa mwenje ne660nm, 660nm SMD LED ichawana kuita kuri nani pane kupisa kupisa. Kune rimwe divi, SMD LED yakawanawo saizi diki pane iyo-yegomba LED, iri nyore kukwana nePCBboard uye otomatiki yekutengesa muchina. Sezvo isu tichiziva, pane matatu chinzvimbo mu5050 SMD LED. Kuti 5050 SMD LED kesi inogona mumapakiti matatu machipisi mukati. Kune chimwe chirongwa, chip chimwe chete chingatadza kusvika icho chinodiwa. Kuti tiwedzere kuburitsa uye nemwaranzi pane imwechete LED, tichaisa izvi ne3 yakafanana LED chip mu5050 SMD LED kuti tisvike yakasimba radiation kana kupenya. Kune mhando dze LED chip dzinogona kuiswa mune imwe 5050 SMD LED, inogona kuva 3 chip dzakasiyana kana 3 chip imwe chete. Zviri zvachose kune chako chinodiwa. Kana imwe chete 660nm LED chip isingakwanise kuita zvaunoda, ino haikuregi uchiodzwa mwoyo Yunifomu mwenje kuburitsa, hwakareba hupenyu hwakasimba mamiriro kutendeseka uye yakaderera simba rekushandisa ese mukana weiyi 3 machipisi 660nm SMD LED. Taura nesu kuti uwane rumwe ruzivo nezvazvo ~

- Divi Paramende -

Iyi SMD LED kesi inowanikwawo kune IR IR, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Kuburitsa Ruvara -

- Magetsi Parameter -

Mhedziso Maximum Ratings At Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optical uye Magetsi Hunhu ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	1.9	2.3	V	IF=60mA
		1.9	2.1	2.4	V	IF=180mA
		2.0	2.2	2.5	V	IF=300mA
Luminous Intensity	ΦVI	2.7		3.8	lm	IF=60mA
		9		13	lm	IF=180mA
		12		18	lm	IF=300mA
Lumiuous Power	PO	35		55	mw	IF=60mA
		120		180	mw	IF=180mA
		200		300	mw	IF=300mA
Peak Wavelength	λP	655	660	665	nm	IF=60mA
Dominant Wavelenth	λd	640	645		nm	IF=60mA
Half Width	Dl		17		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Goridhe waya Kubatanidza -

- kurongedza -

* Isu tinoriputira nevhavha kurongedza mushure metepi iyo sereel

- Kunyorera -

- Yakabatana Red Red -

- Kugadzira -

- 660nm SMD LED Kushandisa -