- Velikost 5 mm LED v luknji -

* Kratek zatič je katoda.

*1. Vse dimenzije so v milimetrih; 2. Toleranca je ± 0,20 mm, če ni drugače navedeno.

Ti primer so na voljo tudi za modro LED skozi luknjo, rdečo LED skozi luknjo, UV LED, IR LED, Amber LED, rumena LED itd.

- LED skozi luknjo sevalno -

*Barve na fotografiji je posnel kamera, prosimo, vzemite dejansko oddajanje barvo kot standardno.

- Električni parametri -

Absolutno največje ocene pri TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optične in električne značilnosti ( t c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Zlata žična povezava -

* Da bi ohranili vsako od LED -jeve dolge življenjske dobe, Bestled Factory uporablja visoko zlato žico za notranje vezje