- infuraredi LED Nyali -

503FIRC-70L / 14I100-60A

700nm IR LED ikupezeka ku Shenzhen Best LED Opto-electronic Co., Ltd. Peak wavelength ndi 700nm, yowonera angle 60 degree ( ± 30 ° ), chip size ndi 350um * 350um, mphamvu yotulutsa mW @ 20mA ndi voltage yamagetsi yamtundu wa 1.8V max. 2.3V @ 20 MA. Tidakhazikitsa ma 700nm infrared LED ndi mamilimita a epoxy omveka. Monga LED yakubowola, pali mitundu ingapo yamawonedwe omwe mungasankhe, ngati ngodya iyi ya 60 degree silingakwaniritse zomwe mukufuna, khalani omasuka kulumikizana nafe ndikutiuza kufunsa kwanu. Kenako tidzazitulutsa ngati ntchito yanu. Kuphatikiza apo, kwa 700nm LED, palinso mitundu ya njira zamaphukusi zomwe zimapezeka mufakitole Yabwino Kwambiri, monga titha kusintha mtundu wa mandala kukhala ngati buluu wonyezimira kapena buluu wakuya momwe mukugwiritsira ntchito, ngati kukula kwa 5mm kuli kwakukulu kwa inu, titha kupanga ndi 3mm ect. Kodi mukufunikira 700nm LED ya polojekiti yanu? Lumikizanani nafe kuti mumve zambiri ~

- Kukula kwa 5 mm kudzera mu dzenje la LED -

Pini lalifupi ndi cathode *

* Ma LED awa a 5mm kudzera mu dzenje amapezekanso ma LED achikaso, Amber LED, UV LED ndi ma IR ena ect e *

- Kupyola mu dzenje la LED Sangalalani -

* Mitundu pachithunzicho idatengedwa ndi kamera, chonde tengani utoto weniweni monga muyezo.

- 700nm anatsogolera XY -

- Magawo Amagetsi -

Mtheradi Zolemba Mavoti Pa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Makhalidwe Abwino ndi Magetsi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Radiant Intensity	Ee	50		60	mw/sr	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Kuti musunge nthawi yonse yayitali ya LED, fakitale ya BestLED imagwiritsa ntchito waya wagolide woyenga bwino kwambiri polumikizira mkati

- Kutulutsa kwa LED -

* Tikhoza kumunyamula anatsogolera izi ndi chiwerengero cha phukusi ndipo zikujambulidwa kapena unakhota zikhomo LED monga lamulo lanu.

- Kulandilidwa -

- Njira Yopangira -

- Dzenje lakuyatsa IR -