- infuraredi LED Nyali -

Gawo #: 503FIRC-74L / 14I100-45A

Sikuti 730nm infrared LED itha kugwiritsidwa ntchito ngati infrared LED therapy, komanso 730nm LED, 740nm LED, 760nm LED itha kugwiritsidwa ntchito kwambiri mu mitundu ya makina azitsulo a IR LED. Palinso mitundu yowonera pazithunzi za LED yodutsamo zomwe mungasankhe. Mawonekedwe owonera osiyanasiyana amapangitsa kuyatsa kosiyanasiyana, mutha kusankha iliyonse ya polojekiti yanu. Kodi mukufuna 740nm LED emitter ya projekiti yanu? Lumikizanani nafe mukudziwa, chinthu ichi chokhala ndi moyo wautali komanso chodalirika komanso kugwiritsa ntchito mphamvu zochepa sichikulolani kukhumudwa. Monga tikudziwa, ma infrared LED amatulutsa kuwala kofiira akagwira ntchito. Kodi mukuganiza kuti ma infrared LED sangawone ndi maso athu? Ndiye mutha kuzilakwitsa pankhaniyi ~ Koma kutalika kwa kutalika kwanthawi yayitali, kuwala kochepa komwe mungafikire. Monga tikudziwa, pali mphamvu yayikulu mukamagwiritsa ntchito diode ya 740nm laser, muyenera kuyigwiritsa ntchito mosamala mukatero mudzadziwotcha. Koma chifukwa cha izi, tidalumikiza izi ndi 740nm LED chip ndi mandala omveka. Chimene chiri chabe diode yotulutsa kuwala .

- Kukula kwa 5 mm kudzera mu dzenje la LED -

- Kupyola mu dzenje la LED Sangalalani -

* Mitundu pachithunzicho idatengedwa ndi kamera, chonde tengani utoto weniweni monga muyezo.

- Kudzera-bowo anatsogolera chizindikiro -

Mtheradi Zolemba Mavoti Pa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Makhalidwe Abwino ndi Magetsi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Kulumikizana kwa waya wagolide -

* Pofuna kusunga nthawi yayitali ya LED, fakitale ya BestLED imagwiritsa ntchito waya wagolide wangwiro wolumikizira mkati

- Kutulutsa kwa LED -

* Tikhoza kumunyamula anatsogolera izi ndi chiwerengero cha phukusi ndipo zikujambulidwa kapena unakhota zikhomo LED monga lamulo lanu.

- IR Yogwirizana -

- Njira Yopangira -

- Dzenje lakuyatsa la IR -