- Lampi LED infra-aħmar -

503IRBT-94L / 16I120-45A

Dawn l-LED infra-aħmar ta '5mm kienu ppakkjati minn lenti blu. Dan huwa Emitter LED infra-aħmar, xi nies jistgħu jaħsbu li ma naraw l-ebda dawl ta 'kulur meta dan l-LED infra-aħmar ikun qed jaħdem. Imma fil-fatt, nistgħu naraw xi ftit aħmar / dim aħmar meta xi lampi LED infrared ta 'qawwa għolja ta' 940nm qed jaħdmu. Xi proġett jista 'ma jaċċettax dan id-dawl aħmar, allura nippakkjaw dan b'lenti blu biex tkopri dan id-dawl żejjed. Għandek bżonn xi 940nm LED b'output ta '0.4W għall-proġett tiegħek? Ikkuntattjana għal aktar denb dwarha. Hemm ukoll tip ta 'angolu tal-vista għall-għażla tiegħek.

- Daqs ta '5 mm IR minn ġo toqba LED -

* Dan id-daqs huwa wkoll disponibbli għal LED ieħor, bħal UV LED, IR LED (810nm LED, 850nm LED ...), LED Amber, LED Isfar, RGB LED, Lampi LED Teptip *

- Ħadid permezz ta 'toqba IR LED -

* Il-kuluri fir-ritratt ittieħdu bil-kamera, jekk jogħġbok ħu kulur attwali li jarmi bħala standard.

- Parametru tal-LED IR-toqba -

Klassifikazzjonijiet Massimi Assoluti F'Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karatteristiċi ottiċi u elettriċi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Konnessjoni tal-wajer tad-deheb -

* Sabiex iżżomm kull ħajja twila tal-LED, il-fabbrika BestLED tuża wajer tad-deheb pur għoli għal konnessjoni taċ-ċirkwit intern

- Ippakkjar LED LED -

* Nistgħu nippakkjaw dan l-LED bi kwalunkwe numru ta 'pakketti u ndaħħlu jew indawru l-labar LED bħala l-ħtieġa tiegħek.

- LED IR relatat -

- Proċess ta 'Produzzjoni -

- T IR-toqba IR LED -